Ledpoi

dodgymike·ledpoi·hardware/leds/led.kicad_pcb

Ledpoi PCB layout, top view — open source PIC board by dodgymike

About the Ledpoi PCB

Ledpoi is an open source PIC PCB design by dodgymike, published on GitHub. It is a 2-layer board measuring 187.3 × 36.2 mm, with 75 components from 7 distinct parts.

Its main chip is the PIC18F2450, from the PIC family. Other key parts include the 74HC594. By type, the board carries 34 resistors, 32 diodes, 5 ICs, 2 capacitors, 1 crystal and 1 connector.

From the project

LED Poi

Hardware design and software for an LED-based fire-poi

Main components on the Ledpoi

PIC18F245074HC594

Ledpoi bill of materials (BOM)

75 components, 7 distinct parts.

QtyPartRefs
1
PIC18F2450
U1
4
74HC594
U2, U3, U4, U5
1
20 MHz
X1
1
ICD3 header
P1
32
LED
D1, D2, D3, D4, D5, D6, D7, D8 +24
2
22pf
C1, C2
34
100
R1, R2, R3, R4, R5, R6, R7, R8 +26

Ledpoi design files

The KiCad project lives in the dodgymike/ledpoi repository on GitHub; these links point at the commit this page was built from.

Ledpoi: common questions

What microcontroller does the Ledpoi use?

The Ledpoi is built around the PIC18F2450, from the PIC family.

How big is the Ledpoi PCB?

The Ledpoi measures 187.3 × 36.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ledpoi?

75 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ledpoi design files?

From the dodgymike/ledpoi repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Ledpoi design in my own project?

The repository has no license, so all rights stay with dodgymike. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ledpoi without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

Similar boards