Lp np
doofmars·lp-np
About the Lp np PCB
Lp np is an open source PCB design by doofmars, published on GitHub under the MIT license. It is a 2-layer board measuring 115.2 × 70.5 mm, with 42 components from 5 distinct parts.
Other key parts include the ProMicro. By type, the board carries 20 switches, 20 diodes and 1 IC.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
A low profile numpad with Cherry MX ULP (Ultra Low Profile) Switches
The Low Profile - Numpad (lp-np) is my first attempt at creating my own PCB from scratch. This was done with the long-lasting wish to create some hardware. A keyboard (numpad in this case) is a first project with less complexity on the used parts and hardware. In the past I gathered some experience in ordering and soldering a Corne keyboard and for creating this project I used the KiCad files as a template. This helped me to get the right schematic and after some trial and error a layout that looks right.

Main components on the Lp np
Lp np bill of materials (BOM)
42 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro | ProMicro_v3 | U1 |
| 1 | SW_PUSH | ResetSW_1side | RSW1 |
| 5 | Cherry_ULP_SMD | Cherry_ULP_SMD | SW1, SW2, SW3, SW4, SW5 |
| 15 | SW_Push | Cherry_ULP_SMD | SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13 +7 |
| 20 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +12 |
Lp np design files
The KiCad project lives in the doofmars/lp-np repository on GitHub; these links point at the commit this page was built from.
- Layoutnumpad.kicad_pcb
- Schematicnumpad.kicad_sch
Lp np: common questions
How big is the Lp np PCB?
The Lp np measures 115.2 × 70.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lp np?
42 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lp np design files?
From the doofmars/lp-np repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lp np design in my own project?
Yes, under the terms of its MIT license, which doofmars chose for the repository.
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kAnyon e motherboard
byrantech
133 × 92 mm258 parts6LMIT4.3kSwitch
byrantech
18.5 × 11.1 mm5 parts2LMIT4.3k