Attiny412-pulsenode

draarivpatel-ui·attiny412-pulsenode

Attiny412-pulsenode PCB layout, top view — open source AVR/Arduino board by draarivpatel-ui

About the Attiny412-pulsenode PCB

Attiny412-pulsenode is an open source AVR/Arduino PCB design by draarivpatel-ui, published on GitHub. It is a 2-layer board measuring 36 × 26 mm, with 4 components from 4 distinct parts.

Its main chip is the ATTINY412-SSNR, from the AVR/Arduino family. By type, the board carries 1 IC, 1 connector, 1 diode and 1 capacitor.

From the project

A compact 2-layer node built around the 8-pin ATtiny412-SSNR (SOIC-8) microcontroller: an ambient-light-driven PWM LED with a button, a status LED, and a piezo click. Designed in KiCad 8.

A compact 2-layer node built around the 8-pin ATtiny412-SSNR (SOIC-8) microcontroller: an ambient-light-driven PWM LED with a button, a status LED, and a piezo click. Designed in KiCad 8.

Live inspector: index.html (served by GitHub Pages) shows the board in 3D and 2D, the net routing status, and every download. It is generated from the KiCad file, so its numbers always match the board.

Attiny412-pulsenode, from the project README
From the project README

Main components on the Attiny412-pulsenode

Attiny412-pulsenode bill of materials (BOM)

4 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATTINY412-SSNR
ATtiny412-SSNR
U1
1
PH1-03-UA
UPDI_HDR
J1
1
KT-0805Y
PWM_AMBER
D1
1
CL21B104KBCNNNC
100nF
C1

Attiny412-pulsenode design files

The KiCad project lives in the draarivpatel-ui/attiny412-pulsenode repository on GitHub; these links point at the commit this page was built from.

Attiny412-pulsenode: common questions

What microcontroller does the Attiny412-pulsenode use?

The Attiny412-pulsenode is built around the ATTINY412-SSNR, from the AVR/Arduino family.

How big is the Attiny412-pulsenode PCB?

The Attiny412-pulsenode measures 36 × 26 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Attiny412-pulsenode?

4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Attiny412-pulsenode design files?

From the draarivpatel-ui/attiny412-pulsenode repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Attiny412-pulsenode design in my own project?

The repository has no license, so all rights stay with draarivpatel-ui. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Attiny412-pulsenode without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards