8 open source boards using the ATTINY412-SSNR
Real designs built with the ATTINY412-SSNR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Timrrr
johnowhitaker
32 × 32 mm16 parts2LNo license0AVR/Arduino
Badge blob
HeyPCB
63.2 × 85 mm15 parts2LCERN-OHL-S-2.00AVR/Arduino
Torch cat
HeyPCB
40.3 × 61.3 mm14 parts2LCERN-OHL-S-2.00AVR/Arduino
Tinypulse-412
draarivpatel-ui
38 × 25 mm14 parts2LMIT0AVR/Arduino
Plant buddy
HeyPCB
40.3 × 127.9 mm13 parts2LCERN-OHL-S-2.00AVR/Arduino
Fridge owl
HeyPCB
42 × 53.2 mm10 parts2LCERN-OHL-S-2.00AVR/Arduino
Chirpkey-8
draarivpatel-ui
32 × 24 mm10 parts2LNo license0AVR/Arduino
Attiny412-pulsenode
draarivpatel-ui
36 × 26 mm4 parts2LNo license0
How designs wire the ATTINY412-SSNR
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the ATTINY412-SSNR connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 is tied to VBAT on 8 of 8 designs.
- Pin 8 is tied to GND on 8 of 8 designs.
- Pin 1 has a decoupling capacitor on 5 of 8 designs, most often 100 nF.
- Pin 2 has a series resistor on 5 of 8 designs, most often 100 Ω (then 330 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: VBAT 100% |
|
| Pin 2 | Connected to: Signal 88% |
|
| Pin 3 | Connected to: Signal 75% · not connected 25% |
|
| Pin 4 | Connected to: Signal 75% · not connected 25% |
|
| Pin 5 | Connected to: Signal 63% · not connected 38% |
|
| Pin 7 | Connected to: Signal 88% |
|
| Pin 8 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Attiny412-pulsenode by draarivpatel-ui, Chirpkey-8 by draarivpatel-ui, Tinypulse-412 by draarivpatel-ui and Badge blob by HeyPCB.
The ATTINY412-SSNR in open source designs
The gallery holds 8 open source boards using the ATTINY412-SSNR from 8 GitHub repositories; a typical one measures about 39.1 × 42.6 mm and carries around 14 components.
100% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Timrrr by johnowhitaker.
Microcontrollers on boards using the ATTINY412-SSNR
What boards using the ATTINY412-SSNR are built for
ATTINY412-SSNR: common questions
Where can I find a ATTINY412-SSNR reference design?
Each of the 8 boards on this page is a real design using the ATTINY412-SSNR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ATTINY412-SSNR pin 1 connected?
Pin 1 is tied to VBAT on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the ATTINY412-SSNR.
How is the ATTINY412-SSNR pin 8 connected?
Pin 8 is tied to GND on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the ATTINY412-SSNR.
What resistor goes on the ATTINY412-SSNR pin 2?
Pin 2 has a series resistor on 5 of 8 designs, most often 100 Ω (then 330 Ω). Counted from the KiCad layouts of 8 open source designs using the ATTINY412-SSNR.
Which microcontrollers do boards using the ATTINY412-SSNR use?
Most are built on AVR/Arduino (8).
How big is a typical board using the ATTINY412-SSNR?
The median is 39.1 × 42.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the ATTINY412-SSNR?
By GitHub stars, Timrrr by johnowhitaker, with 0 stars.
Can I simulate one of these boards using the ATTINY412-SSNR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.