Blare clock

draarivpatel-ui·blare-clock·pcb/blare_clock.kicad_pcb

Blare clock PCB layout, top view — open source board by draarivpatel-ui

About the Blare clock PCB

Blare clock is an open source PCB design by draarivpatel-ui, published on GitHub under the MIT license. It is a 2-layer board measuring 92 × 54 mm, with 8 components from 8 distinct parts.

Other key parts include the 113991054 and DS3231SN-MOD. By type, the board carries 4 switches, 2 ICs, 1 connector and 1 buzzer.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

BlareClock: XIAO ESP32-C3 desk alarm clock with 2.25in ST7789 TFT, DS3231 RTC, 85dB piezo buzzer, KiCad 8 PCB, and OpenSCAD enclosure

Try the Live Interactive Clock & Hardware Inspector: https://aariv.me/blare-clock/

I designed and built BlareClock for the Hack Club Stardance BLARE alarm clock mission. It is a dedicated hardware desk alarm clock powered by a Seeed Studio XIAO ESP32-C3, a wide-aspect 2.25" ST7789 SPI TFT bar display (284x76 IPS), a DS3231 temperature-compensated I2C real-time clock (TCXO) with CR2032 coin-cell backup, a 12mm 85dB passive piezo buzzer, and four front-facing Omron tactile push buttons.

Blare clock, from the project README
From the project README

Main components on the Blare clock

113991054DS3231SN-MOD

Blare clock bill of materials (BOM)

8 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
113991054
XIAO_ESP32C3
U1
1
DS3231SN-MOD
DS3231_RTC
U2
1
ST7789-2.25-284X76
ST7789_2.25_TFT
J1
1
PS1240P02BT
PIEZO_85dB
BZ1
1
B3F-1050
SNOOZE
SW1
1
B3F-1050
ALARM
SW2
1
B3F-1050
PLUS
SW3
1
B3F-1050
MINUS
SW4

Blare clock design files

The KiCad project lives in the draarivpatel-ui/blare-clock repository on GitHub; these links point at the commit this page was built from.

Blare clock: common questions

How big is the Blare clock PCB?

The Blare clock measures 92 × 54 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Blare clock?

8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Blare clock design files?

From the draarivpatel-ui/blare-clock repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Blare clock design in my own project?

Yes, under the terms of its MIT license, which draarivpatel-ui chose for the repository.

Similar boards