6 open source boards using the 113991054
Real designs built with the 113991054, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Base station
yeyintlwin
100 × 92 mm53 parts2LMIT0Raspberry Pi
SIP-Pi hat
IMHarris
85 × 56 mm33 parts2LCC-BY-SA-4.00ESP32
Spool sentry
rwrife
66 × 75 mm32 parts2LMIT0ESP32
Parts tally
rwrife
100 × 60 mm31 parts2LNo license0ESP32
Wireless tank sensor
eburi
55 × 52 mm22 parts4LMIT0Blare clock
draarivpatel-ui
92 × 54 mm8 parts2LMIT0
How designs wire the 113991054
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 113991054 connects to, and the resistors, capacitors and other passives placed on it.
- The D0 pin is left unconnected on 5 of 6 designs.
- The D8 pin is left unconnected on 5 of 6 designs.
- The D9 pin is left unconnected on 5 of 6 designs.
- The D10 pin has a series resistor on 4 of 6 designs, most often 4.7 kΩ (then 470 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| D0pin 1 | Connected to: Not connected 83% · a signal 17% | — |
| D1pin 2 | Connected to: Signal 83% · not connected 17% |
|
| D2pin 3 | Connected to: Signal 67% · not connected 33% |
|
| D3pin 4 | Connected to: Signal 67% · not connected 33% |
|
| D4pin 5 | Connected to: NAU7802SGI 33% · not connected 33% |
|
| D5pin 6 | Connected to: NAU7802SGI 33% · not connected 33% |
|
| D8pin 9 | Connected to: Not connected 83% · a signal 17% | — |
| D9pin 10 | Connected to: Not connected 83% · a signal 17% | — |
| D10pin 11 | Connected to: Signal 83% · not connected 17% |
|
| VCC_3V3pin 12 | Connected to: 3.3V 67% · not connected 33% | — |
| GNDpin 13 | Connected to: GND 100% | — |
| VUSBpin 14 | Connected to: 5V 67% · not connected 17% · a signal 17% |
|
| Pin B+ | Connected to: Not connected 100% | — |
| Pin B- | Connected to: Not connected 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Blare clock by draarivpatel-ui, Wireless tank sensor by eburi, SIP-Pi hat by IMHarris and Parts tally by rwrife.
The 113991054 in open source designs
The gallery holds 6 open source boards using the 113991054 from 6 GitHub repositories; a typical one measures about 88.5 × 58 mm and carries around 32 components.
83% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.
The most starred is Base station by yeyintlwin.
Parts used alongside the 113991054
Microcontrollers on boards using the 113991054
What boards using the 113991054 are built for
113991054: common questions
Where can I find a 113991054 reference design?
Each of the 6 boards on this page is a real design using the 113991054. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 113991054 D0 pin connected?
The D0 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 113991054.
How is the 113991054 D8 pin connected?
The D8 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 113991054.
How is the 113991054 D9 pin connected?
The D9 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 113991054.
Which microcontrollers do boards using the 113991054 use?
Most are built on ESP32 (4) and Raspberry Pi (1).
How big is a typical board using the 113991054?
The median is 88.5 × 58 mm, and 83% are two-layer designs.
What is the most popular open source board using the 113991054?
By GitHub stars, Base station by yeyintlwin, with 0 stars.
Can I simulate one of these boards using the 113991054 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.