ThingsCore-1-EVAL
DreamXLabs·ThingsCore-1-EVAL·kicad/ThingsCore-1-EVAL.kicad_pcb
About the ThingsCore-1-EVAL PCB
ThingsCore-1-EVAL is an open source PCB design by DreamXLabs, published on GitHub. It is a 2-layer board measuring 49 × 85 mm, with 23 components from 12 distinct parts.
Other key parts include the PCIE-52P40H. By type, the board carries 10 resistors, 6 capacitors, 3 connectors, 1 IC, 1 battery holder and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Evaluation board for the DreamXLabs ThingsCore 1 System-on-module
Main components on the ThingsCore-1-EVAL
ThingsCore-1-EVAL bill of materials (BOM)
23 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCIE-52P40H Val** | ThingsCore-1 | U1 |
| 1 | HR911105A RJ45_Hanrun_HR911105A_Horizontal | RJ45_Hanrun_HR911105A_Horizontal | J2 |
| 1 | 901-211A1021D10100 USB_A | USB_TYPE_A | J3 |
| 1 | GT-USB-7010ASV USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J6 |
| 1 | S8411-45R | Battery_Holder_CR1220_S8411-45R | BT1 |
| 1 | DSHP03TS-S | SW-SMD_DSHP03TS-S | SW1 |
| 1 | XL-1608SURC-06 RED | LED_0603_1608Metric | D4 |
| 2 | CC0603KRX7R9BB104 100n | C_0603_1608Metric | C1, C2 |
| 4 | CL21A226MAQNNNE 22u | C_0805_2012Metric | C3, C4, C5, C6 |
| 6 | 0603WAF1001T5E 1k | R_0603_1608Metric | R1, R2, R3, R4, R5, R7 |
| 2 | 0603WAF5101T5E 5.1k | R_0603_1608Metric | R6, R8 |
| 2 | 0603WAF0000T5E 0R | R_0603_1608Metric | R9, R10 |
ThingsCore-1-EVAL design files
The KiCad project lives in the DreamXLabs/ThingsCore-1-EVAL repository on GitHub; these links point at the commit this page was built from.
ThingsCore-1-EVAL: common questions
How big is the ThingsCore-1-EVAL PCB?
The ThingsCore-1-EVAL measures 49 × 85 mm, has 2 copper layers and is 1.5842 mm thick.
How many components are on the ThingsCore-1-EVAL?
23 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ThingsCore-1-EVAL design files?
From the DreamXLabs/ThingsCore-1-EVAL repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ThingsCore-1-EVAL design in my own project?
The repository has no license, so all rights stay with DreamXLabs. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979