Dimmer
drkntz·Dimmer·PCB/Dimmer.kicad_pcb
About the Dimmer PCB
Dimmer is an open source PCB design by drkntz, published on GitHub. It is a 2-layer board measuring 99.1 × 69.9 mm, with 47 components from 34 distinct parts.
Other key parts include the MOC3023M, LNK3206D and H11L1. By type, the board carries 20 resistors, 8 diodes, 7 capacitors, 3 ICs, 3 connectors and 2 test points.
From the project
A peripheral for microprocessor control of 120V AC
This project originally started in 2020 as a proof of concept for an AC motor controller, but can be used for many projects involving variable duty cycle AC control. It supports operation for low current (<5A) AC driving as a low-side switch.
The original board included both an AC triac control and a 5V non-isolated power supply (linkswitch LNK3206). This unit was meant for use in situations where the device is fully enclosed in an insulated housing. However, if fully isolated operation is desired, the Dimmer may be used with an external 5V power supply, as it contains optically isolated…

Main components on the Dimmer
Dimmer bill of materials (BOM)
47 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOC3023M | DIP-6_W7.62mm | U1 |
| 1 | LNK3206D | PowerIntegrations_SO-8C | U2 |
| 1 | H11L1 | SMDIP-6_W9.53mm | U3 |
| 1 | SC146D | TO-220-3_Horizontal_TabDown | Q1 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x03 | TE_826576-3_1x03_P3.96mm_Vertical | J2 |
| 1 | Load (motor) | TE_826576-2_1x02_P3.96mm_Vertical | J3 |
| 1 | 2A | R_Axial_DIN0516_L15.5mm_D5.0mm_P7.62mm_Vertical | F1 |
| 1 | Zcross_TP | PinHeader_1x02_P2.54mm_Vertical | TP1 |
| 1 | 5v_live_TP | PinHeader_1x02_P2.54mm_Vertical | TP2 |
| 1 | D_Bridge_+A-A | Diode_Bridge_Vishay_KBPC6 | D1 |
| 2 | US1M | D_SMA | D2, D4 |
| 1 | SK510 | D_2114_3652Metric_Pad1.85x3.75mm_HandSolder | D3 |
| 1 | zcross | LED_D5.0mm | D5 |
| 1 | Trigger | LED_D5.0mm | D6 |
| 1 | EXT_PWR | LED_D5.0mm | D7 |
| 1 | 5v_live | LED_D5.0mm | D9 |
| 1 | 560uH | L_Wuerth_HCI-1030 | L1 |
| 1 | 680uH | L_Wuerth_HCI-1030 | L2 |
| 1 | 200nF | C_1206_3216Metric | C1 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.7uF | CP_Elec_8x10 | C2, C3 |
| 1 | 10nF | C_1206_3216Metric | C4 |
| 1 | 100nF | C_1206_3216Metric | C5 |
| 1 | 10uF | CP_Radial_D4.0mm_P2.00mm | C6 |
| 1 | 100uF | CP_Radial_D5.0mm_P2.50mm | C7 |
| 3 | 1k | R_1206_3216Metric | R1, R11, R13 |
| 1 | 100R | R_1206_3216Metric | R2 |
| 1 | 1.2k | R_1206_3216Metric | R3 |
| 1 | 8R | R_Axial_DIN0411_L9.9mm_D3.6mm_P20.32mm_Horizontal | R4 |
| 7 | 10k | R_1206_3216Metric | R5, R6, R8, R17, R18, R19, R20 |
| 1 | 2.49k | R_1206_3216Metric | R7 |
| 1 | 4.22k | R_1206_3216Metric | R9 |
| 1 | 15k | R_1206_3216Metric | R10 |
| 4 | 500R | R_1206_3216Metric | R12, R14, R15, R16 |
Dimmer design files
The KiCad project lives in the drkntz/Dimmer repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Dimmer.kicad_pcb
Dimmer: common questions
How big is the Dimmer PCB?
The Dimmer measures 99.1 × 69.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dimmer?
47 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dimmer design files?
From the drkntz/Dimmer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Dimmer design in my own project?
The repository has no license, so all rights stay with drkntz. Use it as a reference, and ask the author before reusing the design.