Pod 1702A 2708
About the Pod 1702A 2708 PCB
Pod 1702A 2708 is an open source PCB design by DuPAL-PAL-DUmper, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 80 × 58.4 mm, with 15 components from 10 distinct parts.
Other key parts include the RD-0512D, LM7905 and LM7909. By type, the board carries 8 capacitors, 4 connectors and 3 ICs.
From the project
This repository contains the KiCad files and the gerber files for the DuPAL boards.
Any use of this project is under your own responsibility. You will be responsible of checking the correct construction and functionality of your board and the compatiblity of the chips You will insert into it. By using this project You will agree that I cannot be held responsible if it will destroy any of your devices, damage your computer, burn down your house or whatever.
Main components on the Pod 1702A 2708
Pod 1702A 2708 bill of materials (BOM)
15 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RD-0512D | Recom_SIP6 | U1 |
| 1 | LM7905 | TO-220-3_Vertical | U2 |
| 1 | LM7909 | TO-220-3_Vertical | U3 |
| 1 | dupico connector | DIP-42_W15.24mm | J1 |
| 1 | 1702A | DIP_Socket-24_W11.9_W12.7_W15.24_W17.78_W18.5_3M_224-1275-00-0602J | J2 |
| 1 | 2708 | DIP_Socket-24_W11.9_W12.7_W15.24_W17.78_W18.5_3M_224-1275-00-0602J | J3 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 5 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3, C4, C5, C6 |
| 1 | 47uF | CP_Radial_D5.0mm_P2.00mm | C2 |
| 2 | 10uF | CP_Radial_D5.0mm_P2.00mm | C7, C8 |
Pod 1702A 2708 design files
The KiCad project lives in the DuPAL-PAL-DUmper/DuPAL_Board repository on GitHub; these links point at the commit this page was built from.
Pod 1702A 2708: common questions
How big is the Pod 1702A 2708 PCB?
The Pod 1702A 2708 measures 80 × 58.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pod 1702A 2708?
15 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pod 1702A 2708 design files?
From the DuPAL-PAL-DUmper/DuPAL_Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pod 1702A 2708 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which DuPAL-PAL-DUmper chose for the repository.
