Psg riser
About the Psg riser PCB
Psg riser is an open source PCB design by durangoretro, published on GitHub. It is a 2-layer board measuring 48.3 × 53.3 mm, with 10 components from 9 distinct parts.
Other key parts include the SN76489A, 74HC574, 74HC138 and 74HC08. By type, the board carries 4 ICs, 3 resistors, 2 connectors and 1 capacitor.
From the project
Hardware Blueprints
Durango: Durango Computer Keyboard and Controller layout: Keyboard and Controller layout component Overlay: KeyBoard Overlay Breakout riser: Breakout Riser Cartridge 28 Pin Cartridge: 28 Pin Cartridge 32k Cartridge: 32K Cartridge Uiversal ROM: Universal ROM with PSG DevKart: Development Cartridge with SD Card Reader psg-riser: PSG Riser ShadowRam: Shadow Ram Cartridge With SD Card Reader NanoLink: NanoLink peripherial Fast SPI: Fast SPI Cartridge
Main components on the Psg riser
Psg riser bill of materials (BOM)
10 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN76489A | DIP-16_W7.62mm_Socket | U1 |
| 1 | 74HC574 | DIP-20_W7.62mm_Socket | U2 |
| 1 | 74HC138 | DIP-16_W7.62mm_Socket | U3 |
| 1 | 74HC08 | DIP-14_W7.62mm_Socket | U4 |
| 1 | Durango_ROM | Durango_ROM | J1 |
| 1 | CARTRIDGE | PinSocket_2x18_EDGE | J2 |
| 1 | 10µ | CP_Radial_D4.0mm_P1.50mm | C1 |
| 2 | 3K3 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R3 |
| 1 | 4K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2 |
Psg riser design files
The KiCad project lives in the durangoretro/hardware repository on GitHub; these links point at the commit this page was built from.
Psg riser: common questions
How big is the Psg riser PCB?
The Psg riser measures 48.3 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Psg riser?
10 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Psg riser design files?
From the durangoretro/hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Psg riser design in my own project?
The repository has no license, so all rights stay with durangoretro. Use it as a reference, and ask the author before reusing the design.
More boards in hardware
V2
177.8 × 130.8 mm148 parts2LNo license0
V2-eia
177.8 × 130.8 mm148 parts2LNo license0
Full
177.8 × 130.8 mm121 parts2LNo license0
Top5x8kbd
177.8 × 130.8 mm67 parts2LNo license0
Spi
82.6 × 39.4 mm29 parts2LNo license0
Cart2832bbspsg
71.1 × 63.5 mm15 parts2LNo license0
Devcart32k
114.3 × 53.3 mm9 parts2LNo license0
Shadow32k
74.9 × 63.5 mm9 parts2LNo license0
NanoLink
39.4 × 21.8 mm6 parts2LNo license0
Breakout riser
52.1 × 53.3 mm4 parts2LNo license0