Satelliet Sensor Node
dvvansia·Satelliet_Sensor_Node·Satellite_Sensor_Node/Satellite_Sensor_Node.kicad_pcb
About the Satelliet Sensor Node PCB
Satelliet Sensor Node is an open source AVR/Arduino PCB design by dvvansia, published on GitHub. It is a 2-layer board measuring 26.1 × 28.4 mm, with 22 components from 17 distinct parts.
Its main chip is the ATmega328P-A, from the AVR/Arduino family. Other key parts include the AMS1117-3.3. By type, the board carries 7 capacitors, 5 connectors, 4 resistors, 2 ICs, 2 diodes and 1 crystal.
It belongs with the sensors, rf & radio and iot & wireless designs in this gallery.
From the project
A satellite-compatible sensor node schematic designed in KiCAD 9.0 for environmental monitoring and wireless telemetry.
A satellite-compatible sensor node schematic designed in KiCAD 9.0 for environmental monitoring and wireless telemetry.
View the interactive cyanotype blueprint portfolio: https://dvvansia.github.io/SatellietSensorNode
The website features: - 4-sheet interactive engineering blueprint with cyanotype aesthetic - Live RF link budget calculator with real-time physics recalculation - Detailed subsystem callouts with simulation results and schematics - Engineering roadmap and contact form - Responsive design with GitHub Pages deployment
Main components on the Satelliet Sensor Node
Satelliet Sensor Node bill of materials (BOM)
22 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ATmega328P-A | TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | 16MHz | Crystal_SMD_HC49-SD | Y1 |
| 1 | 12V_BUS_IN | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | AVR_ISP | PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | TEMP_ANALOG | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | I2C_SENSOR | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | UART_TELEMETRY | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | SW_Push | SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | 1N5819 | D_SOD-123 | D1 |
| 1 | PWR_LED | LED_0805_2012Metric | D2 |
| 2 | 10uF | C_0805_2012Metric | C1, C2 |
| 2 | 22pF | C_0805_2012Metric | C3, C4 |
| 3 | 100nF | C_0805_2012Metric | C5, C6, C7 |
| 1 | 1k | R_0805_2012Metric | R1 |
| 1 | 10k | R_0805_2012Metric | R2 |
| 2 | 4.7k | R_0805_2012Metric | R3, R4 |
Satelliet Sensor Node design files
The KiCad project lives in the dvvansia/Satelliet_Sensor_Node repository on GitHub; these links point at the commit this page was built from.
Satelliet Sensor Node: common questions
What microcontroller does the Satelliet Sensor Node use?
The Satelliet Sensor Node is built around the ATmega328P-A, from the AVR/Arduino family.
How big is the Satelliet Sensor Node PCB?
The Satelliet Sensor Node measures 26.1 × 28.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Satelliet Sensor Node?
22 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Satelliet Sensor Node design files?
From the dvvansia/Satelliet_Sensor_Node repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Satelliet Sensor Node design in my own project?
The repository has no license, so all rights stay with dvvansia. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Satelliet Sensor Node without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k