Sequence One - Control Board
dwilliams·pcb-things·tmp-seq-one/seq-one-control-board/seq-one-control-board.kicad_pcb
About the Sequence One - Control Board
Sequence One - Control Board is an open source PCB design by dwilliams, published on GitHub under the BSD-2-Clause license. It is a 2-layer board measuring 99.1 × 90 mm, with 46 components from 21 distinct parts.
Other key parts include the 40106 and 4023. By type, the board carries 12 resistors, 11 connectors, 10 capacitors, 7 diodes and 6 ICs.
From the project
A place to keep all of the PCB things that don't fit in a project
Main components on the Sequence One - Control Board
Sequence One - Control Board bill of materials (BOM)
46 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 40106 | DIP-14_W7.62mm_Socket_LongPads | U1 |
| 5 | 4023 | DIP-14_W7.62mm_Socket_LongPads | U2, U3, U4, U5, U6 |
| 1 | Step Button | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Step Jack | Jack_6.35mm_Neutrik_NRJ6HM-1-PRE_Horizontal | J2 |
| 1 | Start Button | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Start Jack | Jack_6.35mm_Neutrik_NRJ6HM-1-PRE_Horizontal | J4 |
| 1 | Reset Button | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Reset Jack | Jack_6.35mm_Neutrik_NRJ6HM-1-PRE_Horizontal | J6 |
| 1 | Loop Switch | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | OneTwo Switch | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Power to Steps | PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Signals | PinHeader_1x11_P2.54mm_Vertical | J10 |
| 1 | Power | Molex_KK-396_5273-04A_1x04_P3.96mm_Vertical | J11 |
| 6 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6 |
| 1 | LED | LED_D5.0mm | D7 |
| 8 | 100nF | C_Disc_D5.1mm_W3.2mm_P5.00mm | C1, C2, C5, C6, C7, C8, C9, C10 |
| 2 | 10uF | CP_Radial_D6.3mm_P2.50mm | C3, C4 |
| 5 | 100K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R6, R7, R8, R9 |
| 3 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R10, R11 |
| 3 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R4, R5 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R12 |
Sequence One - Control Board design files
The KiCad project lives in the dwilliams/pcb-things repository on GitHub; these links point at the commit this page was built from.
Sequence One - Control Board: common questions
How big is the Sequence One - Control Board?
The Sequence One - Control Board measures 99.1 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sequence One - Control Board?
46 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sequence One - Control Board design files?
From the dwilliams/pcb-things repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sequence One - Control Board design in my own project?
Yes, under the terms of its BSD-2-Clause license, which dwilliams chose for the repository.