15 open source boards using the 4023

Real designs built with the 4023, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the 4023

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 4023 connects to, and the resistors, capacitors and other passives placed on it.

VSSpin 7Connected to: GND 89%
Pin 12Connected to: A connector 20%, 4071 20%, 4013 20%
  • Series resistor on 30% · 15 kΩ (1), 10 kΩ (1)
VDDpin 14Connected to: VCC 78%

11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Retro CALC by ptravnik, Geophonetdsconductschem by ARTS-Laboratory, 1802-Mini-Compact-Flash by dmadole and 1802-Mini-Super-Elf-Bus by dmadole.

The 4023 in open source designs

The gallery holds 15 open source boards using the 4023 from 11 GitHub repositories; a typical one measures about 100 × 98.8 mm and carries around 44 components.

100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Retro CALC by ptravnik.

Microcontrollers on boards using the 4023

4023: common questions

Where can I find a 4023 reference design?

Each of the 15 boards on this page is a real design using the 4023. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 4023?

The 4001, 4049, 4011, 4013 and 4071 appear in the most repositories here.

Which microcontrollers do boards using the 4023 use?

Most are built on AVR/Arduino (5).

How big is a typical board using the 4023?

The median is 100 × 98.8 mm, and 100% are two-layer designs.

What is the most popular open source board using the 4023?

By GitHub stars, Retro CALC by ptravnik, with 8 stars.

Can I simulate one of these boards using the 4023 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part