HardLabs

MicArrayPro

dylanzodrow·Aerial_Drone_Tracking·Kicad4/MicArrayPro.kicad_pcb

MicArrayPro PCB layout, top view — open source AVR/Arduino board by dylanzodrow

About the MicArrayPro PCB

MicArrayPro is an open source AVR/Arduino PCB design by dylanzodrow, published on GitHub. It is a 2-layer board measuring 183.4 × 183.4 mm, with 49 components from 9 distinct parts.

Its main chip is the ArduinoLike, from the AVR/Arduino family. Other key parts include the SN74HC138. By type, the board carries 24 diodes, 9 capacitors, 6 resistors, 1 IC and 1 connector.

It belongs with the robotics & motion designs in this gallery.

From the project

This iteration has thicker lines and proper vieas.

Main components on the MicArrayPro

SN74HC138

MicArrayPro bill of materials (BOM)

49 components, 9 distinct parts.

QtyPartRefs
1
SN74HC138
U2
1
Conn_01x12_Male
J1
8
ICS-52000
Mic1, Mic2, Mic3, Mic4, Mic5, Mic6, Mic7, Mic8
24
LED
D1, D2, D3, D4, D5, D6, D7, D8 +16
8
.1u
C1, C2, C3, C4, C5, C6, C7, C8
1
10uF
C9
2
1k
R1, R2
3
100
R3, R9, R11
1
100k
R4

MicArrayPro design files

The KiCad project lives in the dylanzodrow/Aerial_Drone_Tracking repository on GitHub; these links point at the commit this page was built from.

MicArrayPro: common questions

What microcontroller does the MicArrayPro use?

The MicArrayPro is built around the ArduinoLike, from the AVR/Arduino family.

How big is the MicArrayPro PCB?

The MicArrayPro measures 183.4 × 183.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MicArrayPro?

49 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the MicArrayPro design files?

From the dylanzodrow/Aerial_Drone_Tracking repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the MicArrayPro design in my own project?

The repository has no license, so all rights stay with dylanzodrow. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MicArrayPro without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Aerial_Drone_Tracking

Similar boards