Dz Distortion Main
About the Dz Distortion Main PCB
Dz Distortion Main is an open source PCB design by dzavalishin, published on GitHub. It is a 2-layer board measuring 90.2 × 72.4 mm, with 86 components from 47 distinct parts.
Other key parts include the TL072 and ECC88. By type, the board carries 25 resistors, 19 diodes, 19 capacitors, 9 connectors, 3 ICs and 1 switch.
From the project
Misc smart house hardware
Main components on the Dz Distortion Main
Dz Distortion Main bill of materials (BOM)
86 components, 47 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL072 | DIP-8_W7.62mm_LongPads | U1 |
| 1 | ECC88 | Valve_ECC-83-2 | U2 |
| 1 | TL072 | DIP-8_W7.62mm | U4 |
| 1 | ModPower | PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | Heater | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Anode +300v | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Chan Switch | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Instrument Switch | PinHeader_1x01_P2.54mm_Vertical | J8 |
| 1 | Inst In | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | Inst In' | PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | In | PinHeader_1x05_P2.54mm_Vertical | J11 |
| 1 | In' | PinHeader_1x05_P2.54mm_Vertical | J12 |
| 3 | HK4100F | HK4100F | RL1, RL2, RL3 |
| 1 | 1m | Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 4 | 10k | Potentiometer_Runtron_RM-065_Vertical | RV2, RV3, RV5, RV6 |
| 1 | 500k | Potentiometer_Runtron_RM-065_Vertical | RV4 |
| 1 | 100k | PinHeader_1x03_P2.54mm_Vertical | RV7 |
| 1 | Mode | PinHeader_1x04_P2.54mm_Vertical | SW1 |
| 2 | Red | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D6 |
| 11 | LL4148 | D_MiniMELF | D2, D3, D4, D5, D8, D9, D15, D16 +3 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Blue | LED_D3.0mm | D7 |
| 4 | 1n34a | D_DO-34_SOD68_P2.54mm_Vertical_KathodeUp | D10, D11, D12, D13 |
| 1 | Z 5v6 | D_MiniMELF | D22 |
| 2 | 47,0 25v | CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 7 | 0,1 | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4, C5, C14, C16, C26, C27 |
| 2 | 22,0 450v | CP_Radial_D13.0mm_P5.00mm | C6, C11 |
| 1 | 0,022 400v | C_Rect_L7.0mm_W3.5mm_P5.00mm | C7 |
| 1 | 330 | C_Disc_D5.0mm_W2.5mm_P2.50mm | C8 |
| 1 | 1,0 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 2 | 0,22 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C15 |
| 1 | 0,22 400v | C_Rect_L7.0mm_W3.5mm_P5.00mm | C12 |
| 2 | 33 | C_Disc_D5.0mm_W2.5mm_P2.50mm | C13, C18 |
| 2 | 100 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | 470k | R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical | R3, R9 |
| 3 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R10, R20 |
| 2 | 1,5k 1/2w | R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical | R5, R12 |
| 1 | 220k 1w | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R6 |
| 1 | 22k 1w | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R7 |
| 1 | 470k | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R8 |
| 2 | 4,7k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11, R21 |
| 1 | 100k 1w | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R13 |
| 2 | 470 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14, R19 |
| 1 | 220k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15 |
| 1 | 6,8k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16 |
| 1 | 4,7k 1w | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R17 |
| 4 | 220 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R18, R25, R30, R32 |
| 1 | 1m | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R26 |
Dz Distortion Main design files
The KiCad project lives in the dzavalishin/hardware repository on GitHub; these links point at the commit this page was built from.
Dz Distortion Main: common questions
How big is the Dz Distortion Main PCB?
The Dz Distortion Main measures 90.2 × 72.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dz Distortion Main?
86 components, from 47 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dz Distortion Main design files?
From the dzavalishin/hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dz Distortion Main design in my own project?
The repository has no license, so all rights stay with dzavalishin. Use it as a reference, and ask the author before reusing the design.
More boards in hardware
DelSol Mixer
254 × 54 mm121 parts2LNo license3
Dacha Talker
71 × 140 mm110 parts2LNo license3
AVR/ArduinoDz TapeDelay Control
106.7 × 58.4 mm110 parts2LNo license3
TapeDelay
108 × 77.5 mm107 parts2LNo license3
Dz Mixer
68.9 × 118.5 mm105 parts2LNo license3
DelSol Modulator
99.1 × 48.3 mm84 parts2LNo license3
Dz HeadPhones Amp
76.2 × 69.9 mm79 parts2LNo license3
DelSol Preamp
110.5 × 38.1 mm75 parts2LNo license3
DelSol Voice
110.5 × 32.4 mm69 parts2LNo license3
DelSol Voice 2
114.9 × 35.6 mm64 parts2LNo license3
DelSol PSU
122.6 × 50.8 mm61 parts2LNo license3