Dz Mixer
About the Dz Mixer PCB
Dz Mixer is an open source PCB design by dzavalishin, published on GitHub. It is a 2-layer board measuring 68.9 × 118.5 mm, with 105 components from 48 distinct parts.
Other key parts include the TL084, TL072 and TL082. By type, the board carries 36 resistors, 23 capacitors, 12 diodes, 11 connectors, 4 ICs and 3 transistors.
From the project
Misc smart house hardware
Main components on the Dz Mixer
Dz Mixer bill of materials (BOM)
105 components, 48 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TL084 | DIP-14_W7.62mm_Socket_LongPads | U1, U3 |
| 1 | TL072 | DIP-8_W7.62mm_Socket_LongPads | U2 |
| 1 | TL082 | DIP-8_W7.62mm_Socket_LongPads | U4 |
| 1 | BF256B | TO-92 | Q1 |
| 2 | BC547 | TO-92 | Q2, Q3 |
| 1 | In 1 | Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J1 |
| 1 | In 2 | Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J2 |
| 1 | Out | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | In 3 | Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J4 |
| 1 | Tri Out | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | In 4 | Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J6 |
| 1 | Pulse Out | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Power | PinHeader_2x05_P2.54mm_Vertical | J8 |
| 1 | Gate | Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J9 |
| 1 | Rnd Out | PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | Noise Out | PinHeader_1x02_P2.54mm_Vertical | J11 |
| 3 | 100k | PinHeader_1x03_P2.54mm_Vertical | RV1, RV2, RV12 |
| 1 | 500 | Potentiometer_Runtron_RM-065_Vertical | RV3 |
| 1 | 5k | Potentiometer_Runtron_RM-065_Vertical | RV4 |
| 3 | 10k | Potentiometer_Runtron_RM-065_Vertical | RV5, RV11, RV14 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 20k | PinHeader_1x03_P2.54mm_Vertical | RV6, RV7, RV8, RV9 |
| 2 | 100k | Potentiometer_Runtron_RM-065_Vertical | RV10, RV15 |
| 1 | 50k | PinHeader_1x03_P2.54mm_Vertical | RV13 |
| 1 | Slow/Fast | PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 4 | D | D_MiniMELF_Handsoldering | D1, D2, D4, D5 |
| 1 | LFO | LED_D3.0mm | D3 |
| 2 | 5v6 | D_MiniMELF_Handsoldering | D6, D7 |
| 4 | LL4148 | D_MiniMELF_Handsoldering | D8, D9, D10, D11 |
| 1 | Gate | LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D12 |
| 4 | 1,0 | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C12, C14, C21 |
| 12 | 0,1 | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C6, C7, C8, C9, C10, C15, C16 +4 |
| 1 | 10,0 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 2 | 47 | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5 |
| 1 | 1n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11 |
| 1 | 22,0 x 35v | CP_Radial_D8.0mm_P2.50mm | C13 |
| 2 | 10,0 | CP_Elec_4x5.4 | C17, C19 |
| 1 | 120k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 4 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R5, R20, R23 |
| 11 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R6, R8, R16, R17, R18, R25 +3 |
| 11 | 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R9, R10, R11, R12, R13, R14, R15 +3 |
| 1 | 2k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19 |
| 2 | 1m | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R22, R36 |
| 1 | 100 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R26 |
| 1 | 22k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R27 |
| 1 | 5,1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R30 |
| 1 | 2,7k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R32 |
| 1 | 4,7k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R33 |
| 1 | 47k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R35 |
Dz Mixer design files
The KiCad project lives in the dzavalishin/hardware repository on GitHub; these links point at the commit this page was built from.
Dz Mixer: common questions
How big is the Dz Mixer PCB?
The Dz Mixer measures 68.9 × 118.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dz Mixer?
105 components, from 48 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dz Mixer design files?
From the dzavalishin/hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dz Mixer design in my own project?
The repository has no license, so all rights stay with dzavalishin. Use it as a reference, and ask the author before reusing the design.
More boards in hardware
DelSol Mixer
254 × 54 mm121 parts2LNo license3
Dacha Talker
71 × 140 mm110 parts2LNo license3
AVR/ArduinoDz TapeDelay Control
106.7 × 58.4 mm110 parts2LNo license3
TapeDelay
108 × 77.5 mm107 parts2LNo license3
Dz Distortion Main
90.2 × 72.4 mm86 parts2LNo license3
DelSol Modulator
99.1 × 48.3 mm84 parts2LNo license3
Dz HeadPhones Amp
76.2 × 69.9 mm79 parts2LNo license3
DelSol Preamp
110.5 × 38.1 mm75 parts2LNo license3
DelSol Voice
110.5 × 32.4 mm69 parts2LNo license3
DelSol Voice 2
114.9 × 35.6 mm64 parts2LNo license3
DelSol PSU
122.6 × 50.8 mm61 parts2LNo license3