Pod-7
About the Pod-7 PCB
Pod-7 is an open source PCB design by earlynerd, published on GitHub. It is a 4-layer board measuring 17 × 35 mm, with 24 components from 19 distinct parts.
Other key parts include the DRV2625YFFR and M2003FC1AE. By type, the board carries 8 resistors, 7 capacitors, 5 connectors, 2 ICs, 1 module and 1 fuse.
From the project
Open main/main.kicadpro and satellite/satellite.kicadpro in KiCad 10.
Open main/main.kicadpro and satellite/satellite.kicadpro in KiCad 10.
- main/: one controller daughterboard PCBA; its haptic pod is a separate universal board. - satellite/: one universal PCBA, built eight times per wrist. JP1 selects normal or end-of-chain operation. - HapticBracelet.kicadsym, HapticBracelet.pretty/: shared libraries referenced by both projects. - panel/: future derived manufacturing panel, never the source for board edits. - verification/project-split/: current schematic PDFs, previews and check reports. - archive/combined-project/: superseded eight-island project…
Main components on the Pod-7
Pod-7 bill of materials (BOM)
24 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV2625YFFR DRV2625 Texas Instruments | DRV2625_YFF_9_0.4mm | U10 |
| 1 | M2003FC1AE Nuvoton | TSSOP-20_4.4x6.5mm_P0.65mm | U25 |
| 1 | VLV041235L Vybronics | Vybronics_VLV041235L_FPC_Contact_Draft | M8 |
| 1 | CHAIN IN | WirePads_6_P2mm | J128 |
| 1 | CHAIN OUT | WirePads_6_P2mm | J129 |
| 1 | ICE / INITIAL FLASH | WirePads_5_P1.27mm | J130 |
| 1 | NTC (optional) | WirePads_2_P2mm | J131 |
| 1 | PROTECTED CELL 90mAh | WirePads_2_P2mm | J207 |
| 1 | 0467.250NR 250mA FAST Littelfuse | Fuse_Littelfuse_467_0603 | F107 |
| 3 | 100n | C_0402_1005Metric | C26, C27, C170 |
| 1 | 1u | C_0402_1005Metric | C28 |
| 1 | 10u | C_0805_2012Metric | C171 |
| 1 | 10n | C_0402_1005Metric | C172 |
| 1 | 22u 10V X5R | C_0805_2012Metric | C173 |
| 2 | 4.7k | R_0402_1005Metric | R22, R23 |
| 2 | 0 | R_0402_1005Metric | R53, R170 |
| 1 | 33 | R_0402_1005Metric | R171 |
| 2 | 100k | R_0402_1005Metric | R172, R173 |
| 1 | 10k 1% | R_0402_1005Metric | R175 |
Pod-7 design files
The KiCad project lives in the earlynerd/ELRS-haptics repository on GitHub; these links point at the commit this page was built from.
Pod-7: common questions
How big is the Pod-7 PCB?
The Pod-7 measures 17 × 35 mm, has 4 copper layers and is 0.8 mm thick.
How many components are on the Pod-7?
24 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pod-7 design files?
From the earlynerd/ELRS-haptics repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pod-7 design in my own project?
The repository has no license, so all rights stay with earlynerd. Use it as a reference, and ask the author before reusing the design.
More boards in ELRS-haptics
ESP32Merged
21 × 55.9 mm261 parts4LNo license0
ESP32Candidate
21 × 55.9 mm261 parts4LNo license0
ESP32Input
21 × 55.9 mm69 parts4LNo license0
ESP32Main
20 × 46 mm47 parts4LNo license0
Haptic bracelet / satellite PCBA
20 × 46 mm26 parts4LNo license0
Pod-7-routed
17 × 35 mm24 parts4LNo license0
Complete input routed
17 × 35 mm23 parts4LNo license0
Completed template
17 × 35 mm23 parts4LNo license0
Pod-6
17 × 35 mm23 parts4LNo license0