Delivery robot
ECE49022Team22·delivery-robot-pcb·LDO_KiCad/footprint-verification/FOOTPRINT_CHECK_ONLY.kicad_pcb
About the Delivery robot PCB
Delivery robot is an open source PCB design by ECE49022Team22, published on GitHub. It is a 2-layer board, with 1 components from 1 distinct parts.
Other key parts include the TPS7A8101DRBR.
It belongs with the robotics & motion designs in this gallery.
From the project
Delivery robot KiCad PCB project and reusable 3.3 V LDO module
Created and verified with KiCad 10.0.6. All files are kept in this folder under Senior Design.
Open this repository's LDOKiCad/STM32LDO.kicadpro in KiCad Manager, then open STM32LDO.kicad_sch and select LDO Power (page 2). The separately pinned original folder is not this repository copy.
The schematic was opened and saved through KiCad 10.0.6 on 2026-10-05 to apply its automatic format repair and conversion. ERC and the exported-netlist connection checks passed again after that save. Do not regenerate it from the original builder, which would overwrite these native editor saves.
Main components on the Delivery robot
Delivery robot bill of materials (BOM)
1 components, 1 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS7A8101DRBR | TI_DRB0008A_VSON8_3x3mm | U1 |
Delivery robot design files
The KiCad project lives in the ECE49022Team22/delivery-robot-pcb repository on GitHub; these links point at the commit this page was built from.
Delivery robot: common questions
How big is the Delivery robot PCB?
The Delivery robot has 2 copper layers and is 1.6 mm thick.
How many components are on the Delivery robot?
1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Delivery robot design files?
From the ECE49022Team22/delivery-robot-pcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Delivery robot design in my own project?
The repository has no license, so all rights stay with ECE49022Team22. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979