HardLabs

Bake

eddyem·STM8_samples·childbake/kicad/bake.kicad_pcb

Bake PCB layout, top view — open source STM32 board by eddyem

About the Bake PCB

Bake is an open source STM32 PCB design by eddyem, published on GitHub. It is a 2-layer board measuring 35.5 × 20 mm, with 11 components from 9 distinct parts.

Its main chip is the STM8L101F3P, from the STM32 family. By type, the board carries 5 connectors, 2 transistors, 2 resistors, 1 IC and 1 capacitor.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

Some code samples and ready projects based on STM8 (deprecated)

Some my projects based on STM8 ==============================

Developed for SDCC compiler. Here you can find some more heades under MIT license.

- 1-wire 1-wire for DS18x20 based on timer and interrupts. - 220controlledsocket Simple two-channel power socket manager with current measurement at one channel. - blinky Just blink LED. - client-term-8bit Simplest terminal client. - distancemeter Ultrasonic distance meter. - DRUM (not even started at all) Approach to toy drum. - led Work with 4-digit LED indicator. - LEDSBT Bluetooth-management 7/8-channel LED "stars". - microdrill Microdrill…

Main components on the Bake

STM8L101F3P

Bake bill of materials (BOM)

11 components, 9 distinct parts.

QtyPartRefs
1
STM8L101F3P
U1
2
SI2305DS
Q1, Q2
1
power
J1
1
USART
J2
1
USART_On
J3
1
SWIM
J4
1
CONN_01X07
J5
1
0.1
C1
2
220
R1, R2

Bake design files

The KiCad project lives in the eddyem/STM8_samples repository on GitHub; these links point at the commit this page was built from.

Bake: common questions

What microcontroller does the Bake use?

The Bake is built around the STM8L101F3P, from the STM32 family.

How big is the Bake PCB?

The Bake measures 35.5 × 20 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Bake?

11 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Bake design files?

From the eddyem/STM8_samples repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Bake design in my own project?

The repository has no license, so all rights stay with eddyem. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Bake without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in STM8_samples

Similar boards