Led bar
efabless·caravel_board·hardware/other/led-bar-pcb/led-bar-pcb.kicad_pcb
About the Led bar PCB
Led bar is an open source PCB design by efabless, published on GitHub. It is a 2-layer board measuring 23.9 × 29.4 mm, with 12 components from 7 distinct parts.
By type, the board carries 10 resistors and 1 connector.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
This repo provides firmware examples, flash programming and diagnostic tools for testing Open MPW and chipIgnite projects using Caravel. It also provides schematics, layout and gerber files for PCB evaluation and breakout boards.
This repo provides firmware examples, flash programming and diagnostic tools for testing Open MPW and chipIgnite projects using Caravel. It also provides schematics, layout and gerber files for PCB evaluation and breakout boards.
See the README for the the Nucleo automated test setup here
See the README for testing projects here -- https://github.com/efabless/caravel_board/tree/main/firmware/chipignite#readme
Led bar bill of materials (BOM)
12 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10118193-0001LF Conn_01x11_Socket | PinSocket_1x11_P2.54mm_Vertical | J1 |
| 1 | HDSP-4830_2 | HDSP-4830 | BAR1 |
| 5 | RC0805FR-0710KL 51 | R_0805_2012Metric | R1, R2, R5, R6, R8 |
| 1 | RMCF0805FT82R0 51 | R_0805_2012Metric | R3 |
| 1 | RMCF0805FT2K00 51 | R_0805_2012Metric | R4 |
| 1 | RMCF0805FT12K0 51 | R_0805_2012Metric | R7 |
| 2 | RNCP0805FTD150R 51 | R_0805_2012Metric | R9, R10 |
Led bar design files
The KiCad project lives in the efabless/caravel_board repository on GitHub; these links point at the commit this page was built from.
Led bar: common questions
How big is the Led bar PCB?
The Led bar measures 23.9 × 29.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Led bar?
12 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Led bar design files?
From the efabless/caravel_board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Led bar design in my own project?
The repository has no license, so all rights stay with efabless. Use it as a reference, and ask the author before reusing the design.
More boards in caravel_board
Caravel-Nucleo v2-M.2
efabless
73.4 × 92.5 mm90 parts2LNo license40Caravel Nucleo
efabless
68.1 × 92.5 mm89 parts2LNo license40Clear dev v1
efabless
76.2 × 73.8 mm84 parts2LNo license40Fab-Drawing clear dev v1
efabless
76.2 × 73.8 mm84 parts2LNo license405V Development Board
efabless
76.2 × 73.8 mm83 parts4LNo license40Caravel
efabless
54.5 × 52.1 mm72 parts2LNo license40Caravel dev v5-M.2
efabless
76.2 × 73.8 mm68 parts2LNo license40Fab-Drawing caravel dev v5-M.2
efabless
76.2 × 73.8 mm68 parts2LNo license40Caravel-M.2-card-QFN
efabless
22 × 22 mm11 parts4LNo license40Fab-Drawing caravel-M.2-card-QFN
efabless
22 × 22 mm11 parts4LNo license40Caravel-M.2-card-WCSP
efabless
22 × 22 mm9 parts4LNo license40
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979