Die aerzte
el-puerro·die-aerzte
About the Die aerzte PCB
Die aerzte is an open source TI MSP430/CC PCB design by el-puerro, published on GitHub. It is a 4-layer board measuring 177 × 140 mm, with 49 components from 36 distinct parts.
Its main chip is the MSP430F5502IRGZT, from the TI MSP430/CC family. Other key parts include the SN74AUP1G07DPWR. By type, the board carries 15 capacitors, 13 resistors, 5 connectors, 5 test points, 2 ICs and 2 switches.
From the project
aftermarket motherboard for the ThinkPad x200s
Main components on the Die aerzte
Die aerzte bill of materials (BOM)
49 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74AUP1G07DPWR Texas Instruments | DBV5_TEX | U1 |
| 1 | MSP430F5502IRGZT Texas Instruments | RGZ48_5P15X5P15 | U2 |
| 1 | GSB1C41110SSHR USB-C Connector (Power) | AMPHENOL_GSB1C41110SSHR | J1 |
| 1 | 0543630489 543630489 Molex | CON_543630489 | J2 |
| 1 | SFV34R-2STE1HLF Amphenol ICC (FCI) | AMPHENOL_SFV34R-2STE1HLF | J3 |
| 1 | SS-52100-001 USB Type A Stewart Connector | CONN4_2100-001_STW | J4 |
| 1 | 10029449-111RLF HDMI Amphenol ICC (FCI) | CONN_10029449111_AMP | J5 |
| 2 | T2N7002BK,LM T2N7002BK_LM Toshiba Semiconductor and Storage | SOT23_TOS | MOSFET1, MOSFET2 |
| 1 | COMPUTEMODULE5-CM5 ComputeModule5-CM5 | Raspberry-Pi-5-Compute-Module | Module1 |
| 1 | DS04-254-2-01BK-SMT RPIBOOT Same Sky (Formerly CUI Devices) | SW_DS04-254-2-01BK-SMT | S1 |
| 1 | BSL | SW4_1825910-B_TEC | SW1 |
| 1 | Power TP | circular_testpoint | TP1 |
| 2 | GND | circular_testpoint | TP2, TP3 |
| 1 | CLK_OUT | circular_testpoint | TP4 |
| 1 | CLK_IN | circular_testpoint | TP5 |
| 1 | ABLS-6.000MHZ-B4-T 4.00MHz Abracon LLC | XTAL_ABLS-6.000MHZ-B4-T | XT1 |
| 1 | SML-D12U1WT86 Red LED Rohm Semiconductor | LED_SMLD12_ROM | D1 |
| 1 | SML-D12P8WT86 Green LED Rohm Semiconductor | LED_SMLD12_ROM | D2 |
| 1 | MH1608-121Y Bourns Inc. | IND_BOURNS_MH1608 | L1 |
| 2 | GRM31CD80J107MEA8K 100n Murata Electronics | CAPC3216X190N | C1, C2 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CL05A106MP5NUNC 10u Samsung Electro-Mechanics | CAP_CL05_SAM | C3 |
| 3 | C0603C104K5RACTU 0.1u KEMET | CAPC17595_95N_KEM | C4, C5, C6 |
| 1 | CGA4J1X7R1E335K125AC 3.3u TDK Corporation | CAP_2012_TDK | C7 |
| 2 | CL05C330JB5NNNC 33p Samsung Electro-Mechanics | CAP_CL05_SAM | C8, C9 |
| 1 | GRM033R60J474KE90D 0.47u Murata Electronics | CAP_GRM033_MUR | C10 |
| 2 | CL05B224KO5NNNC 0.22u Samsung Electro-Mechanics | CAP_CL05_SAM | C11, C15 |
| 1 | C0402C222J3GEC7411 22n KEMET | CAPC10555_55N_KEM | C12 |
| 2 | GRM1555C1H100FA01D 10pf Murata Electronics | G-155_MUR | C13, C14 |
| 1 | ERA-2AEB222X 2.2k | RES_ERA2AEB222X | R1 |
| 2 | RMCF0603FT1K00 1k Stackpole Electronics Inc | STA_RMCF0603_STP | R2, R3 |
| 2 | CRGP2010F27R 27 TE Connectivity Passive Product | RESC5025X65N | R4, R5 |
| 4 | RC0603FR-0710KL 10k YAGEO | RC0603N_YAG | R6, R7, R8, R9 |
| 1 | RC0603FR-0747KL 47k YAGEO | RC0603N_YAG | R10 |
| 1 | RC0402FR-07330RL 330 YAGEO | RC0402N_YAG | R11 |
| 1 | RC0402FR-071K5L 1.5k YAGEO | RC0402N_YAG | R12 |
| 1 | RC0603FR-07100RL 100 YAGEO | RC0603N_YAG | R13 |
Die aerzte design files
The KiCad project lives in the el-puerro/die-aerzte repository on GitHub; these links point at the commit this page was built from.
Die aerzte: common questions
What microcontroller does the Die aerzte use?
The Die aerzte is built around the MSP430F5502IRGZT, from the TI MSP430/CC family.
How big is the Die aerzte PCB?
The Die aerzte measures 177 × 140 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the Die aerzte?
49 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Die aerzte design files?
From the el-puerro/die-aerzte repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Die aerzte design in my own project?
The repository has no license, so all rights stay with el-puerro. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Die aerzte without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.
Similar boards
TI MSP430/CC
Pluto
carrotIndustries
24.4 × 24.4 mm36 parts2LGPL-3.0536TI MSP430/CC
Apimote
riverloopsec
83.3 × 33.4 mm80 parts4LTAPR-OHL-1.089TI MSP430/CC
Toniebox
toniebox-reverse-engineering
88 × 102 mm11 parts2LNo license36TI MSP430/CC
Nsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33TI MSP430/CC
Elektronika-1
BenjaminSoelberg
29.5 × 29.5 mm14 parts4LGPL-3.029TI MSP430/CC
MSP430 Breadstick - Apple Sauce
upsidedownlabs
18.5 × 65.8 mm31 parts2LCERN-OHL-S-2.021