IV-8 Module
Electro707·p1090_4x_iv8_driver·E1092_PCB_IV-8/IV-11Mounting.kicad_pcb
About the IV-8 Module
IV-8 Module is an open source PCB design by Electro707, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 12 × 19 mm, with 7 components from 4 distinct parts.
By type, the board carries 6 connectors and 1 transformer.
It belongs with the displays & leds designs in this gallery.
From the project
A driver board for 4x IV-8 VFD Tubes
This project is a driver for 4xIV-8 VFD Tubes.
The document for the firmware can be found over at https://electro707.com/documentation/Projects/F1093_docs/
The document also describes the requirements for building the Firmware through the Arduino IDE.
To build the firmware, you will need to make a file wifiDefault.h in the firmrware's folder with the following WIFI credentials

IV-8 Module bill of materials (BOM)
7 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X03 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 4 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2, J4, J5, J6 |
| 1 | USB4085 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | IV-8 VFD Tube | IV-8 VFD | T1 |
IV-8 Module design files
The KiCad project lives in the Electro707/p1090_4x_iv8_driver repository on GitHub; these links point at the commit this page was built from.
IV-8 Module: common questions
How big is the IV-8 Module?
The IV-8 Module measures 12 × 19 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IV-8 Module?
7 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IV-8 Module design files?
From the Electro707/p1090_4x_iv8_driver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IV-8 Module design in my own project?
Yes, under the terms of its GPL-3.0 license, which Electro707 chose for the repository.
More boards in p1090_4x_iv8_driver
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k