SingleDigitVFDDriver
Electro707·p1090_4x_iv8_driver·E1091_PCB_Driver/SingleDigitVFDDriver.kicad_pcb
About the SingleDigitVFDDriver PCB
SingleDigitVFDDriver is an open source ESP32 PCB design by Electro707, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 79 × 72 mm, with 106 components from 32 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the CH340N, LMV358, 74HC595, ULN2003 and LM2733YMF. By type, the board carries 54 resistors, 12 transistors, 10 capacitors, 8 ICs, 6 diodes and 4 transformers.
It belongs with the displays & leds and iot & wireless designs in this gallery.
From the project
A driver board for 4x IV-8 VFD Tubes
This project is a driver for 4xIV-8 VFD Tubes.
The document for the firmware can be found over at https://electro707.com/documentation/Projects/F1093_docs/
The document also describes the requirements for building the Firmware through the Arduino IDE.
To build the firmware, you will need to make a file wifiDefault.h in the firmrware's folder with the following WIFI credentials

Main components on the SingleDigitVFDDriver
SingleDigitVFDDriver bill of materials (BOM)
106 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340N | SOP-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LMV358 | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | 74HC595 | SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 2 | ULN2003 | SOIC-16_3.9x9.9mm_P1.27mm | U6, U8 |
| 1 | LM2733YMF | SOT-23-5 | U7 |
| 1 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U9 |
| 1 | ESP32-WROOM-32E | ESP32-WROOM-32D | U10 |
| 12 | BSS84 | SOT-23 | Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14 +4 |
| 1 | CONN_01X03 Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | USB4085 USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4085 | J3 |
| 1 | 500mA | Fuse_1206_3216Metric | F1 |
| 1 | 3266Y-1-101LF 1k | Potentiometer_Bourns_3266W_Vertical | RV2 |
| 2 | Y97HS12A2VAFP SW_Push | SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW1, SW2 |
| 4 | ~ | IV-8 Adapter | T1, T2, T3, T4 |
| 4 | TestPoint | TestPoint_Keystone_5005-5009_Compact | TP2, TP3, TP4, TP5 |
| 1 | MBR0540 MBR0530 | D_SOD-123 | D1 |
| 1 | ESD5Z5.0T1G | D_SOD-523 | D2 |
| 4 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D3, D4, D5, D6 |
| 1 | FerriteBead | L_0805_2012Metric | FB1 |
| 1 | CBC3225T150KR 15uH | L_1210_3225Metric | L1 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 0.1UF 0.1uF | C_0805_2012Metric | C1, C2, C8, C12 |
| 1 | 4.7UF 4.7uF | C_1206_3216Metric | C6 |
| 1 | 470NF 470nF | C_0805_2012Metric | C7 |
| 1 | 82PF 82pF | C_0805_2012Metric | C10 |
| 3 | 2.2UF 2.2uF | C_0805_2012Metric | C11, C13, C14 |
| 3 | 0 | R_0805_2012Metric | R1, R4, R14 |
| 2 | 5.1K 5.1k | R_0805_2012Metric | R2, R3 |
| 11 | 10K 10k | R_0805_2012Metric | R5, R9, R10, R11, R12, R15, R16, R17 +3 |
| 1 | 270K 270k | R_0805_2012Metric | R13 |
| 1 | 1k | R_0805_2012Metric | R18 |
| 24 | 20K 20k | R_0805_2012Metric | R20, R21, R22, R23, R24, R25, R26, R27 +16 |
| 12 | 100K 100k | R_0805_2012Metric | R46, R47, R48, R49, R50, R51, R52, R53 +4 |
SingleDigitVFDDriver design files
The KiCad project lives in the Electro707/p1090_4x_iv8_driver repository on GitHub; these links point at the commit this page was built from.
SingleDigitVFDDriver: common questions
What microcontroller does the SingleDigitVFDDriver use?
The SingleDigitVFDDriver is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the SingleDigitVFDDriver PCB?
The SingleDigitVFDDriver measures 79 × 72 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SingleDigitVFDDriver?
106 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SingleDigitVFDDriver design files?
From the Electro707/p1090_4x_iv8_driver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SingleDigitVFDDriver design in my own project?
Yes, under the terms of its GPL-3.0 license, which Electro707 chose for the repository.
Can I test firmware for the SingleDigitVFDDriver without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in p1090_4x_iv8_driver
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k