Bast-M7
About the Bast-M7 PCB
Bast-M7 is an open source NXP PCB design by ElectronicCats, published on GitHub. It is a 2-layer board measuring 50.8 × 22.9 mm, with 6 components from 6 distinct parts.
Its main chip is the MIMXRT1011DAE5A, from the NXP family. Other key parts include the W25Q128JVS and AP2112K-3.3. By type, the board carries 3 ICs and 3 connectors.
From the project
Bast M7 is RT1011 NXP with a USB port type C
Firmware released under an GNU AGPL v3.0 license. See the LICENSE file for more information.
Hardware released under an CERN Open Hardware Licence v1.2. See the LICENSE_HARDWARE file for more information.
Electronic Cats is a registered trademark, please do not use if you sell these PCBs.
Main components on the Bast-M7
Bast-M7 bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U1 |
| 1 | MIMXRT1011DAE5A | TQFP-80_12x12mm_P0.5mm | U2 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | Conn_Battery | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J1 |
| 1 | Conn_Left | PinSocket_1x16_P2.54mm_Vertical | J3 |
| 1 | Conn_Right | PinSocket_1x12_P2.54mm_Vertical | J4 |
Bast-M7 design files
The KiCad project lives in the ElectronicCats/Bast-M7 repository on GitHub; these links point at the commit this page was built from.
Bast-M7: common questions
What microcontroller does the Bast-M7 use?
The Bast-M7 is built around the MIMXRT1011DAE5A, from the NXP family.
How big is the Bast-M7 PCB?
The Bast-M7 measures 50.8 × 22.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bast-M7?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bast-M7 design files?
From the ElectronicCats/Bast-M7 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Bast-M7 design in my own project?
The repository has no license, so all rights stay with ElectronicCats. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Bast-M7 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532