33 open source boards using the XC6220B331MR-G
Real designs built with the XC6220B331MR-G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Minino
ElectronicCats
80 × 107.5 mm53 parts2LGPL-3.0178ESP32
Plantpal
teapotlaboratories
38.4 × 128.5 mm109 parts4LMIT98Feather rak3172
teapotlaboratories
51 × 23.1 mm44 parts2LMIT43Nordic nRF
Mdbt micro
siderakb
33 × 17.8 mm29 parts2LMIT18ESP32
Paperd ink rev4
paperdink
92.1 × 78.1 mm89 parts2LCC-BY-SA-4.09PUYA Prototype PY32F030F28P6TU
ElectronicCats
21.4 × 26.5 mm14 parts2LNo license9ESP32
Badge hackgdl-2025
ElectronicCats
73.4 × 79.5 mm54 parts2LNo license7ESP32
Open telegraph
animesh-chouhan
48 × 65.5 mm39 parts2LCERN-OHL-S-2.05Egg LDO 1000
Plaenkler
14 × 15 mm10 parts2LBSD-3-Clause4STM32
FlightComputer
akkdong
148 × 102 mm409 parts4LNo license2ESP32
Bramble
justinlindh
96 × 50 mm84 parts2LMIT2ESP32
Open telegraph
chouhanindustries
48 × 65.5 mm39 parts2LCERN-OHL-S-2.01ESP32
Chess board
shuki25
317.5 × 228.6 mm461 parts4LNo license0ESP32
Plantpal
rajeev2705
38.4 × 128.5 mm110 parts4LNo license0ESP32
ESP32-S3-4Layer-CoreBoard
gorkemguven
102.9 × 43.7 mm101 parts4LGPL-3.00ESP32
S3.1
puji4810
90 × 55 mm79 parts2LApache-2.00ESP32
Color eink work badge
wisdom-km
58 × 92.6 mm78 parts2LCustom license0ESP32
ESP-Audio-Processor
hito-ren
49.4 × 49.9 mm75 parts4LNo license0ESP32
Entropy chess
AnujShah06
95 × 60 mm67 parts2LNo license0ESP32
Smart latch lock
RobbyV2
45 × 34 mm63 parts4LNo license0ESP32
Smart chessboard controller
shuki25
89.8 × 92.5 mm54 parts4LNo license0ESP32
Badge-Ciberseguridad
angelisidro
80 × 107.5 mm53 parts2LNo license0ESP32
Chroma badge
wisdom-km
91 × 84 mm52 parts2LCustom license0ESP32
Smove r2-main
okbrainhq
25 × 30 mm48 parts4LMIT0ESP32
Esp32 bno085
nemonamo
24.5 × 53.4 mm36 parts2LNo license0Teapotlabs BWLR1E Programmer
teapotlaboratories
36.8 × 90.9 mm42 parts2LMIT35EINKPowerMod
akkdong
26 × 30 mm71 parts2LNo license2ESP32
Backup pre fix16
puji4810
90 × 55 mm78 parts2LApache-2.00ESP32
Minino
angelisidro
80 × 107.5 mm53 parts2LNo license0Teapotlabs BWLR1E Programmer
Volumetry
36.8 × 90.9 mm42 parts2LNo license0Bwlr1f prog
teapotlaboratories
61.2 × 26.1 mm40 parts2LNo license0ESP32
Backup ripped
puji4810
90 × 55 mm78 parts2LApache-2.00ESP32
S3.1-before repack
puji4810
90 × 55 mm78 parts2LApache-2.00
How designs wire the XC6220B331MR-G
Read from the KiCad layouts of 28 open source designs, one per repository: what each pin of the XC6220B331MR-G connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 28 of 28 designs, most often 10 µF (then 1 µF).
- The VOUT pin has a decoupling capacitor on 28 of 28 designs, most often 10 µF (then 100 nF).
- The EN pin has a capacitor to GND on 20 of 28 designs, most often 10 µF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 68% · a signal 32% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: Signal 54% · 5V 46% |
|
| NCpin 4 | Connected to: Not connected 96% | — |
| VOUTpin 5 | Connected to: 3.3V 96% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Minino by ElectronicCats, Plantpal by teapotlaboratories, Feather rak3172 by teapotlaboratories and Teapotlabs BWLR1E Programmer by teapotlaboratories.
The XC6220B331MR-G in open source designs
The gallery holds 33 open source boards using the XC6220B331MR-G from 28 GitHub repositories; a typical one measures about 61.2 × 60 mm and carries around 54 components.
73% are two-layer designs, the rest use four layers or more, and 48% carry an open source license.
The most starred is Minino by ElectronicCats.
Parts used alongside the XC6220B331MR-G
Microcontrollers on boards using the XC6220B331MR-G
What boards using the XC6220B331MR-G are built for
XC6220B331MR-G: common questions
Where can I find a XC6220B331MR-G reference design?
Each of the 33 boards on this page is a real design using the XC6220B331MR-G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the XC6220B331MR-G VIN pin?
The VIN pin has a decoupling capacitor on 28 of 28 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 28 open source designs using the XC6220B331MR-G.
What decoupling capacitors do designs use on the XC6220B331MR-G VOUT pin?
The VOUT pin has a decoupling capacitor on 28 of 28 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 28 open source designs using the XC6220B331MR-G.
How is the XC6220B331MR-G EN pin connected?
The EN pin has a capacitor to GND on 20 of 28 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 28 open source designs using the XC6220B331MR-G.
What parts are used alongside the XC6220B331MR-G?
The USBLC6-2SC6, MCP73831T-2ACI/OT, USBLC6-2P6, CH340E and ESP32-C3-MINI-1-N4 appear in the most repositories here.
Which microcontrollers do boards using the XC6220B331MR-G use?
Most are built on ESP32 (24), Nordic nRF (1) and STM32 (1).
How big is a typical board using the XC6220B331MR-G?
The median is 61.2 × 60 mm, and 73% are two-layer designs.
What is the most popular open source board using the XC6220B331MR-G?
By GitHub stars, Minino by ElectronicCats, with 178 stars.
Can I simulate one of these boards using the XC6220B331MR-G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.