WiFiMonitor
About the WiFiMonitor PCB
WiFiMonitor is an open source PCB design by ElectronicCats, published on GitHub. It is a 2-layer board measuring 47.2 × 47.2 mm, with 40 components from 27 distinct parts.
Other key parts include the 4N25, MCP73831T-4ADI/OT, AP1117-33 and DS3231MZ+. By type, the board carries 12 resistors, 7 ICs, 5 capacitors, 4 diodes, 3 connectors and 2 switches.
From the project
El gato vigilante de la torre es un dispositivo open hardware basado en el chip ESP8266 que monitorea el estado de las torretas industriales Patlite®, sin modificar el circuito usted puede monitorear el tiempo de encendido y apagado de cada luz que este en la torreta, puede obten
El gato vigilante de la torre es un dispositivo open hardware basado en el chip ESP8266 que monitorea el estado de las torretas industriales Patlite®, sin modificar el circuito usted puede monitorear el tiempo de encendido y apagado de cada luz que este en la torreta, puede obtener por medio de una red WiFi o exportar sus datos en una microSD para generar despues sus reportes, facil de implementar solo debe ser agregado en uno de los espacios disponibles de la torreta.
Main components on the WiFiMonitor
WiFiMonitor bill of materials (BOM)
40 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 4N25 | DIP-6_W7.62mm_SMDSocket_SmallPads | U1, U2, U3, U4 |
| 1 | MCP73831T-4ADI/OT | SOT95P280X145-5N | U5 |
| 1 | AP1117-33 | SOT-223-3_TabPin2 | U6 |
| 1 | DS3231MZ+ | SOIC8_150MIL | U7 |
| 1 | ADAP_ESP | Pin_Header_Straight_2x06_Pitch2.54mm | J1 |
| 1 | FTDI | Pin_Header_Straight_1x06_Pitch2.54mm | J2 |
| 1 | BATT | PINHEAD1-2 | J3 |
| 1 | 3.3Va | Keystone_battery_second | BTRTC1 |
| 1 | NC | PAD_4X2mmTH | COM1 |
| 1 | TORRETA | PAD_4X2mmTH | COM2 |
| 1 | 0_IN | PAD_4X2mmTH | IN1 |
| 1 | 1_IN | PAD_4X2mmTH | IN2 |
| 1 | 2_IN | PAD_4X2mmTH | IN3 |
| 1 | 3_IN | PAD_4X2mmTH | IN4 |
| 1 | BOTTOM_BOOT | SW_B3U-1000P | S1 |
| 1 | BOTTOM_RST | SW_B3U-1000P | S2 |
| 1 | LED_ON | LED_0805_HandSoldering | D1 |
| 1 | LED_CHAR | LED_0805_HandSoldering | D2 |
| 2 | NRVB120 | D_SOD-123 | D3, D4 |
| 1 | 2.2u | C_0805_HandSoldering | C1 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10u | C_0805_HandSoldering | C2 |
| 1 | 4.7u | C_0805_HandSoldering | C3 |
| 1 | 1uf | C_0805_HandSoldering | C4 |
| 1 | .1uf | C_0805_HandSoldering | C5 |
| 4 | 2K | R_0805_HandSoldering | R1, R2, R3, R4 |
| 6 | 10K | R_0805_HandSoldering | R5, R6, R7, R8, R14, R16 |
| 2 | 1K | R_0805_HandSoldering | R15, R17 |
WiFiMonitor design files
The KiCad project lives in the ElectronicCats/TorretaWiFi repository on GitHub; these links point at the commit this page was built from.
WiFiMonitor: common questions
How big is the WiFiMonitor PCB?
The WiFiMonitor measures 47.2 × 47.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WiFiMonitor?
40 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the WiFiMonitor design files?
From the ElectronicCats/TorretaWiFi repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the WiFiMonitor design in my own project?
The repository has no license, so all rights stay with ElectronicCats. Use it as a reference, and ask the author before reusing the design.
