111 open source boards using the AP1117-33

Real designs built with the AP1117-33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

111 boardsClear filters|Most starred

How designs wire the AP1117-33

Read from the KiCad layouts of 72 open source designs, one per repository: what each pin of the AP1117-33 connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a decoupling capacitor on 61 of 72 designs, most often 10 µF (then 100 nF).
  • The VO pin has a decoupling capacitor on 42 of 72 designs, most often 100 nF (then 10 µF).
GNDpin 1Connected to: GND 99%
VOpin 2Connected to: 3.3V 86%
  • Decoupling capacitor on 58% · 100 nF (35), 10 µF (20), 1 µF (6)
VIpin 3Connected to: 5V 78% · a signal 21%
  • Decoupling capacitor on 85% · 10 µF (28), 100 nF (21), 1 µF (13)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LumenPnP Motherboard by opulo-inc, Vsf m484 by vsfteam, Blep audio by CRImier and Mobo by opulo-inc.

The AP1117-33 in open source designs

The gallery holds 111 open source boards using the AP1117-33 from 76 GitHub repositories; a typical one measures about 67 × 56 mm and carries around 57 components.

78% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is LumenPnP Motherboard by opulo-inc.

Microcontrollers on boards using the AP1117-33

AP1117-33: common questions

Where can I find a AP1117-33 reference design?

Each of the 111 boards on this page is a real design using the AP1117-33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the AP1117-33 VI pin?

The VI pin has a decoupling capacitor on 61 of 72 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 72 open source designs using the AP1117-33.

What decoupling capacitors do designs use on the AP1117-33 VO pin?

The VO pin has a decoupling capacitor on 42 of 72 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 72 open source designs using the AP1117-33.

What parts are used alongside the AP1117-33?

The ESP32-WROOM-32, RP2040, W25Q128JVS, USBLC6-2SC6 and CH340G appear in the most repositories here.

Which microcontrollers do boards using the AP1117-33 use?

Most are built on STM32 (29), ESP32 (21), RP2040/RP2350 (19) and AVR/Arduino (11).

How big is a typical board using the AP1117-33?

The median is 67 × 56 mm, and 78% are two-layer designs.

What is the most popular open source board using the AP1117-33?

By GitHub stars, LumenPnP Motherboard by opulo-inc, with 3,655 stars.

Can I simulate one of these boards using the AP1117-33 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part