WiFiadapter
About the WiFiadapter PCB
WiFiadapter is an open source ESP8266 PCB design by ElectronicCats, published on GitHub. It is a 2-layer board measuring 30 × 31.2 mm, with 9 components from 5 distinct parts.
Its main chip is the ESP8266-12E/ESP-12E, from the ESP8266 family. By type, the board carries 7 resistors, 1 IC and 1 connector.
It belongs with the iot & wireless designs in this gallery.
From the project
El gato vigilante de la torre es un dispositivo open hardware basado en el chip ESP8266 que monitorea el estado de las torretas industriales Patlite®, sin modificar el circuito usted puede monitorear el tiempo de encendido y apagado de cada luz que este en la torreta, puede obten
El gato vigilante de la torre es un dispositivo open hardware basado en el chip ESP8266 que monitorea el estado de las torretas industriales Patlite®, sin modificar el circuito usted puede monitorear el tiempo de encendido y apagado de cada luz que este en la torreta, puede obtener por medio de una red WiFi o exportar sus datos en una microSD para generar despues sus reportes, facil de implementar solo debe ser agregado en uno de los espacios disponibles de la torreta.
Main components on the WiFiadapter
WiFiadapter bill of materials (BOM)
9 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP8266-12E/ESP-12E | XCVR_ESP8266-12E%2fESP-12E | U1 |
| 1 | ADAP_ESP | Pin_Header_Straight_2x06_Pitch2.54mm | J1 |
| 3 | 10k | R_0805_HandSoldering | R1, R3, R4 |
| 1 | 1k | R_0805_HandSoldering | R2 |
| 3 | 4.7k | R_0805_HandSoldering | R5, R6, R7 |
WiFiadapter design files
The KiCad project lives in the ElectronicCats/TorretaWiFi repository on GitHub; these links point at the commit this page was built from.
WiFiadapter: common questions
What microcontroller does the WiFiadapter use?
The WiFiadapter is built around the ESP8266-12E/ESP-12E, from the ESP8266 family.
How big is the WiFiadapter PCB?
The WiFiadapter measures 30 × 31.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WiFiadapter?
9 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the WiFiadapter design files?
From the ElectronicCats/TorretaWiFi repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the WiFiadapter design in my own project?
The repository has no license, so all rights stay with ElectronicCats. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the WiFiadapter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in TorretaWiFi
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398