MegaAktuatorModule
About the MegaAktuatorModule PCB
MegaAktuatorModule is an open source AVR/Arduino PCB design by Elektropioneer, published on GitHub. It is a 2-layer board measuring 130.5 × 69.5 mm, with 28 components from 21 distinct parts.
Its main chip is the ARDUINO_MEGA_SHIELD, from the AVR/Arduino family. Other key parts include the LM7805CT. By type, the board carries 15 connectors, 6 capacitors, 2 diodes, 1 IC, 1 transistor and 1 switch.
From the project
Module for the Arduino MEGA to support EP modules
Main components on the MegaAktuatorModule
MegaAktuatorModule bill of materials (BOM)
28 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805CT | TO-252-2Lead | U1 |
| 1 | BS107 | TO-252-2Lead | Q1 |
| 1 | 5V_AD0 | Pin_Header_Straight_1x08_Pitch2.54mm | J1 |
| 1 | 5V_AD8 | Pin_Header_Straight_1x08_Pitch2.54mm | J2 |
| 1 | GND_AD0 | Pin_Header_Straight_1x08_Pitch2.54mm | J3 |
| 1 | GND_AD8 | Pin_Header_Straight_1x08_Pitch2.54mm | J4 |
| 1 | ENC_M_1 | Pin_Header_Straight_1x08_Pitch2.54mm | J5 |
| 1 | ENC_M_2 | Pin_Header_Straight_1x08_Pitch2.54mm | J6 |
| 1 | ENC_M_3 | Pin_Header_Straight_1x08_Pitch2.54mm | J7 |
| 3 | CONN_01X03 | Pin_Header_Straight_1x03_Pitch2.54mm | J8, J9, J10 |
| 2 | Screw_Terminal_1x02 | TerminalBlock_Pheonix_MKDS1.5-2pol | J11, J13 |
| 1 | CONN_02X08 | Pin_Header_Straight_2x08_Pitch1.27mm_SMD | J12 |
| 1 | CONN_01X06 | Pin_Header_Straight_1x06_Pitch2.00mm_SMD_Pin1Right | J14 |
| 1 | CONN_01X03 | GS3 | J15 |
| 1 | ARDUINO_MEGA_SHIELD | ARDUINO MEGA SHIELD | SHIELD1 |
| 1 | SW_Push | SW_DIP_x1_W7.62mm_Slide_LowProfile | SW1 |
| 1 | D | D_SMB_Standard | D1 |
| 1 | LED | LED_0805 | D2 |
| 3 | C | C_0805 | C1, C3, C8 |
| 3 | CP | CP_Elec_6.3x4.5 | C2, C4, C7 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R | R_0805 | R1 |
MegaAktuatorModule design files
The KiCad project lives in the Elektropioneer/MegaAktuatorModule repository on GitHub; these links point at the commit this page was built from.
- Layoutmegamodule.kicad_pcb
MegaAktuatorModule: common questions
What microcontroller does the MegaAktuatorModule use?
The MegaAktuatorModule is built around the ARDUINO_MEGA_SHIELD, from the AVR/Arduino family.
How big is the MegaAktuatorModule PCB?
The MegaAktuatorModule measures 130.5 × 69.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MegaAktuatorModule?
28 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the MegaAktuatorModule design files?
From the Elektropioneer/MegaAktuatorModule repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the MegaAktuatorModule design in my own project?
The repository has no license, so all rights stay with Elektropioneer. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MegaAktuatorModule without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k