Raspberry Pi GPIB µHAT
About the Raspberry Pi GPIB µHAT
Raspberry Pi GPIB µHAT is an open source PCB design by Elemecca, published on GitHub. It is a 2-layer board measuring 65 × 30 mm, with 39 components from 11 distinct parts.
Other key parts include the SN75160BDW, SN75162BDW and CAT24C32. By type, the board carries 20 resistors, 10 diodes, 3 ICs, 3 capacitors, 2 connectors and 1 transistor.
From the project
GPIB interface for Raspberry Pi
This documentation describes Open Hardware and is licensed under the CERN Open Hardware License v1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR APARTICULAR PURPOSE. Please see the CERN OHL v1.2 for applicable conditions
Main components on the Raspberry Pi GPIB µHAT
Raspberry Pi GPIB µHAT bill of materials (BOM)
39 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN75160BDW | SOIC-20W_7.5x12.8mm_P1.27mm | U1 |
| 1 | SN75162BDW | SOIC-24W_7.5x15.4mm_P1.27mm | U2 |
| 1 | CAT24C32 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | BSH105 | SOT-23 | Q1 |
| 1 | RasPi_Header_40W | PinSocket_2x20_P2.54mm_Vertical_Centered_Anchor | J1 |
| 1 | GPIB | NorComp_111-024-113L001_NoScrews | J2 |
| 9 | BAT54C | SOT-23 | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
| 1 | MMBZ5222BLT1G | SC-59 | D10 |
| 3 | 100n | C_0402_1005Metric | C1, C2, C3 |
| 2 | 3k9 | R_0402_1005Metric | R3, R4 |
| 18 | 1k | R_0402_1005Metric | R5, R10, R11, R12, R13, R14, R15, R16 +10 |
Raspberry Pi GPIB µHAT design files
The KiCad project lives in the Elemecca/rpi-gpib repository on GitHub; these links point at the commit this page was built from.
Raspberry Pi GPIB µHAT: common questions
How big is the Raspberry Pi GPIB µHAT?
The Raspberry Pi GPIB µHAT measures 65 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Raspberry Pi GPIB µHAT?
39 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Raspberry Pi GPIB µHAT design files?
From the Elemecca/rpi-gpib repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Raspberry Pi GPIB µHAT design in my own project?
The repository has no license, so all rights stay with Elemecca. Use it as a reference, and ask the author before reusing the design.
