HardLabs

Rpi gpib pico

Elemecca·rpi-gpib·board/rpi-gpib-pico/rpi-gpib-pico.kicad_pcb

Rpi gpib pico PCB layout, top view — open source RP2040/RP2350 board by Elemecca

About the Rpi gpib pico PCB

Rpi gpib pico is an open source RP2040/RP2350 PCB design by Elemecca, published on GitHub. It is a 2-layer board measuring 65 × 45 mm, with 63 components from 21 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the SN75160BDW, SN75162BDW, W25Q128JVS, NCP1117-3.3 and CAT24C32. By type, the board carries 23 resistors, 20 capacitors, 9 diodes, 6 ICs, 4 connectors and 1 crystal.

From the project

GPIB interface for Raspberry Pi

This documentation describes Open Hardware and is licensed under the CERN Open Hardware License v1.2.

You may redistribute and modify this documentation under the terms of the CERN OHL v1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR APARTICULAR PURPOSE. Please see the CERN OHL v1.2 for applicable conditions

Main components on the Rpi gpib pico

RP2040SN75160BDWSN75162BDWW25Q128JVSNCP1117-3.3CAT24C32

Rpi gpib pico bill of materials (BOM)

63 components, 21 distinct parts.

QtyPartRefs
1
RP2040
U1
1
SN75160BDW
U2
1
SN75162BDW
U3
1
W25Q128JVS
U4
1
NCP1117-3.3
U5
1
CAT24C32
U6
1
12M10PI/XT324-10/20
Y1
1
GPIB
J1
1
USB_B_Micro
J2
1
RasPi_Header_40W
J3
1
Debug
J4
8
BAT54C
D20, D21, D22, D23, D24, D25, D26, D27
1
MMBZ5222BLT1G
D28
14
100n
C1, C2, C3, C4, C5, C6, C7, C10 +6
2
1u
C8, C9
2
10p
C13, C14
2
10u
C16, C17
2
27R4
R1, R2
18
1k
R3, R7, R20, R21, R22, R23, R24, R25 +10
1
10k
R4
Show 1 more
QtyPartRefs
2
3k9
R5, R6

Rpi gpib pico design files

The KiCad project lives in the Elemecca/rpi-gpib repository on GitHub; these links point at the commit this page was built from.

Rpi gpib pico: common questions

What microcontroller does the Rpi gpib pico use?

The Rpi gpib pico is built around the RP2040, from the RP2040/RP2350 family.

How big is the Rpi gpib pico PCB?

The Rpi gpib pico measures 65 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rpi gpib pico?

63 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rpi gpib pico design files?

From the Elemecca/rpi-gpib repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rpi gpib pico design in my own project?

The repository has no license, so all rights stay with Elemecca. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Rpi gpib pico without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in rpi-gpib

Similar boards