Jc2 cf ide
About the Jc2 cf ide PCB
Jc2 cf ide is an open source PCB design by Emile666, published on GitHub. It is a 2-layer board measuring 95.2 × 31.2 mm, with 16 components from 10 distinct parts.
Other key parts include the GAL16V8 and 74LS245. By type, the board carries 8 resistors, 3 connectors, 2 ICs, 2 capacitors and 1 LED.
From the project
Junior-Computer-2 HW and SW
Fourty years later, Joerg Walke created the Junior-Computer 2, which is an expanded version of the original Junior Computer. It contained 32 KB RAM, 8KB ROM and an onboard RS232 serial interface. The development of the Junior Computer 2 is still in progress and you can read all about it on the web-site of Joerg: https://old-computer-tech.net/junior-computer/
Main components on the Jc2 cf ide
Jc2 cf ide bill of materials (BOM)
16 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GAL16V8 | DIP-20_W7.62mm | U1 |
| 1 | 74LS245 | DIP-20_W7.62mm | U2 |
| 1 | IDE-44_Header | PinHeader_2x22_P2.00mm_Vertical | J1 |
| 1 | ADDR | PinHeader_2x03_P2.00mm_Vertical | J3 |
| 1 | JC2_DIN41612_02x32_AC | DIN41612_C_2x32_Male_Horizontal_THT | J4 |
| 1 | ACT | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | LD1 |
| 2 | 100n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 6 | 75 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R4, R6, R7, R8 |
| 1 | 2K2 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 4K7 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
Jc2 cf ide design files
The KiCad project lives in the Emile666/JC2 repository on GitHub; these links point at the commit this page was built from.
Jc2 cf ide: common questions
How big is the Jc2 cf ide PCB?
The Jc2 cf ide measures 95.2 × 31.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jc2 cf ide?
16 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Jc2 cf ide design files?
From the Emile666/JC2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Jc2 cf ide design in my own project?
The repository has no license, so all rights stay with Emile666. Use it as a reference, and ask the author before reusing the design.
