82 open source boards using the GAL16V8
Real designs built with the GAL16V8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Tom80
anjennings
135 × 100 mm49 parts2LMIT93LittleSixteen
SukkoPera
389 × 136.2 mm329 parts2LCustom license76ARIII
na103
114 × 96 mm33 parts2LCC-BY-NC-4.064Minimax8085
skiselev
100 × 80 mm44 parts2LGPL-3.060Dueottosei
na103
138 × 108 mm85 parts4LCC-BY-NC-4.037DeMoN-Flash-J
gerbilbyte
114 × 96 mm38 parts2LCC-BY-NC-4.034We816
danwerner21
360.1 × 141.4 mm128 parts2LNo license32MiniPerformerPlus
hkzlab
74.2 × 88.9 mm42 parts4LCC-BY-NC-4.029MixSID
hbekel
62.2 × 57.4 mm76 parts2LNo license26PCSuperCombo
JayesonLS
123.3 × 95 mm39 parts2LMIT21MyCpu
fortinsylvain
194.5 × 188.6 mm156 parts4LMIT18- schematic only · 124 parts
Arcade-IremM92 MiSTer
MiSTer-devel
124 partsGPL-2.017 Tandy-Color-Computer-Multi-Pak
djtersteegc
203.4 × 139.1 mm62 parts2LMIT16ReSeed
SukkoPera
60.8 × 100 mm55 parts2LNo license15Junior interface
laurent-fr
217.2 × 113 mm116 parts2LCC-BY-NC-4.014Mini68k
seventhoctave
147.3 × 100.3 mm37 parts2LNo license13MUTIF09 I/O Expansion Board
ja1umi
155 × 114 mm181 parts2LMIT10Zf vga
tangent3D
143 × 85 mm52 parts2LMIT10ESP32
ZX21
fordp2002
142 × 100 mm125 parts2LBSD-3-Clause9Qx10 titan clone
brijohn
281 × 79 mm48 parts2LNo license9TIM-011B
Board-Folk
232.8 × 204.2 mm149 parts2LNo license8Bondwell1MB
ChartreuseK
55 × 61.2 mm31 parts2LBSD-3-Clause7AVR/Arduino
MZ-700 SD
yanataka60
100 × 100 mm21 parts2LMIT6Bbc multirom
rhalkyard
85.1 × 62.9 mm7 parts2LNo license5AVR/Arduino
Theroof
a-wai
60 × 53.6 mm18 parts2LCERN-OHL-1.23Bus Card
Synthron
350 × 108 mm95 parts4LNo license2Steve 68k
stevegg
177 × 140.7 mm91 parts2LNo license2Mini8085
schenkmi
100 × 80 mm44 parts2LNo license2Amix 68k (r0)
SmallRobot2000
333.4 × 149.9 mm169 parts4LNo license1RP2040/RP2350
We816-mark2
danwerner21
360.1 × 141.4 mm128 parts2LNo license1Exordisk v1
roberto314
160 × 100 mm110 parts2LNo license1MKV 4 DENISE ITX
Gnome78
129.5 × 55 mm40 parts4LNo license1OPD-Computer-One-Disk-Interface
stephen-usher
82 × 76 mm22 parts2LCC0-1.01A2E IOU SpeakerReplacement
hkzlab
33 × 55.9 mm6 parts2LCC-BY-SA-4.01- schematic only · 69 parts
Yaufp8088
fifteenhex
69 partsGPL-3.01 - schematic only · 36 partsAVR/Arduino
Smart-Viscosity-Measurement and-Control-System-VYTRON
rashadrahimzade
36 partsCustom license1
How designs wire the GAL16V8
Read from the KiCad layouts of 52 open source designs, one per repository: what each pin of the GAL16V8 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 31 of 52 designs, most often 100 nF (then 22 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 94% | — |
| VCCpin 20 | Connected to: 5V 96% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tom80 by anjennings, LittleSixteen by SukkoPera, ARIII by na103 and Minimax8085 by skiselev.
The GAL16V8 in open source designs
The gallery holds 82 open source boards using the GAL16V8 from 56 GitHub repositories; a typical one measures about 138 × 100 mm and carries around 45 components.
77% are two-layer designs, the rest use four layers or more, and 34% carry an open source license.
The most starred is Tom80 by anjennings.
Parts used alongside the GAL16V8
Microcontrollers on boards using the GAL16V8
What boards using the GAL16V8 are built for
GAL16V8: common questions
Where can I find a GAL16V8 reference design?
Each of the 82 boards on this page is a real design using the GAL16V8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the GAL16V8 VCC pin?
The VCC pin has a decoupling capacitor on 31 of 52 designs, most often 100 nF (then 22 pF). Counted from the KiCad layouts of 52 open source designs using the GAL16V8.
What parts are used alongside the GAL16V8?
The 74LS245, 74LS74, 74LS04, 74LS244 and 74LS32 appear in the most repositories here.
Which microcontrollers do boards using the GAL16V8 use?
Most are built on AVR/Arduino (3), RP2040/RP2350 (2) and ESP32 (1).
How big is a typical board using the GAL16V8?
The median is 138 × 100 mm, and 77% are two-layer designs.
What is the most popular open source board using the GAL16V8?
By GitHub stars, Tom80 by anjennings, with 93 stars.
Can I simulate one of these boards using the GAL16V8 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.