Esc
About the Esc PCB
Esc is an open source PCB design by emilyliiuu, published on GitHub. It is a 4-layer board measuring 36 × 54 mm, with 89 components from 14 distinct parts.
Other key parts include the MCT8329A1IREER. By type, the board carries 7 connectors, 4 ICs, 1 switch and 1 capacitor.
From the project
uiuc ece445 senior design
Main components on the Esc
Esc bill of materials (BOM)
89 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | MCT8329A1IREER | WQFN36_REE_TEX-L | U1, U2, U3, U4 |
| 1 | Conn_02x08_Odd_Even | BC084-16-A-0390-L-C | J1 |
| 1 | Conn_01x02_Pin | AMASS_XT30U-F_1x02_P5.0mm_Vertical | J2 |
| 1 | Conn_01x03_Socket | JST_PH_B3B-PH-SM4-TB_1x03-1MP_P2.00mm_Vertical | J3 |
| 4 | Conn_01x03_Socket | SolderWire-0.15sqmm_1x03_P4mm_D0.5mm_OD1.5mm | J4, J5, J6, J7 |
| 24 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CA1, CA4, CA5, CA6, CA8, CA9, CB1, CB4 +16 |
| 8 | 470nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CA2, CA3, CB2, CB3, CC2, CC3, CD2, CD3 |
| 4 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CA7, CB7, CC7, CD7 |
| 24 | NMOS | Vishay_PowerPAK_1212-8_Single | QA1, QA2, QA3, QA4, QA5, QA6, QB1, QB2 +16 |
| 8 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RA1, RA2, RB1, RB2, RC1, RC2, RD1, RD2 |
| 4 | 10m | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RA3, RB3, RC3, RD3 |
| 4 | 200k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RA4, RB4, RC4, RD4 |
| 1 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_Copal_CHS-04A_W5.08mm_P1.27mm_JPin | SW1 |
| 1 | C | CP_Radial_D5.0mm_P2.50mm | C1 |
Esc design files
The KiCad project lives in the emilyliiuu/birdsimulator repository on GitHub; these links point at the commit this page was built from.
Esc: common questions
How big is the Esc PCB?
The Esc measures 36 × 54 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Esc?
89 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esc design files?
From the emilyliiuu/birdsimulator repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esc design in my own project?
The repository has no license, so all rights stay with emilyliiuu. Use it as a reference, and ask the author before reusing the design.
