Bird suit main
About the Bird suit main PCB
Bird suit main is an open source STM32 PCB design by emilyliiuu, published on GitHub. It is a 2-layer board measuring 50 × 60 mm, with 45 components from 25 distinct parts.
Its main chip is the STM32F410CBTx, from the STM32 family. Other key parts include the LT1129-3.3_SOT223, SX1280IMLTRT and IIM-20670. By type, the board carries 14 capacitors, 7 connectors, 6 resistors, 4 ICs, 3 switches and 3 diodes.
From the project
uiuc ece445 senior design
Main components on the Bird suit main
Bird suit main bill of materials (BOM)
45 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F410CBTx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | LT1129-3.3_SOT223 | SOT-223-3_TabPin2 | U2 |
| 1 | SX1280IMLTRT | QFN24_4X4_SEM | U3 |
| 1 | IIM-20670 | QFN50P450X450X115-25N | U4 |
| 1 | NX2016SA-52MHZ-EXS00A-CS06016 | NX2016SA_NDK | Q1 |
| 3 | Conn_01x07_Pin | JST_PH_S7B-PH-K_1x07_P2.00mm_Horizontal | J1, J2, J3 |
| 1 | Conn_01x02_Socket | AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J4 |
| 1 | CONMHF1-SMD-T | CONN_CONMHF1-SMD_LNX | J5 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Conn_01x05_Pin | PinSocket_1x05_P2.54mm_Vertical | J7 |
| 4 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CX1, CX2, CX3, CX4 |
| 3 | SW_Push | SW_PUSH_6mm | SW2, SW3, SW4 |
| 3 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3 |
| 1 | 15uH | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | 3nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2 |
| 1 | 2.5nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L3 |
| 1 | 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 4 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C11, C13, C15 |
| 1 | 0.8pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 470nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1.2pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C10 |
| 3 | 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C14, C16 |
| 1 | 0.5pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | 100pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 6 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6 |
Bird suit main design files
The KiCad project lives in the emilyliiuu/birdsimulator repository on GitHub; these links point at the commit this page was built from.
Bird suit main: common questions
What microcontroller does the Bird suit main use?
The Bird suit main is built around the STM32F410CBTx, from the STM32 family.
How big is the Bird suit main PCB?
The Bird suit main measures 50 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bird suit main?
45 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bird suit main design files?
From the emilyliiuu/birdsimulator repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bird suit main design in my own project?
The repository has no license, so all rights stay with emilyliiuu. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Bird suit main without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in birdsimulator
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9k
STM32Type g
169 × 30 mm24 parts2LApache-2.02.9k
STM32Main panel
234 × 84 mm26 parts4LApache-2.02.9k
STM32Type a
150 × 30 mm14 parts2LApache-2.02.9k
STM32Type c
188 × 30 mm17 parts2LApache-2.02.9k