Video transmitter
About the Video transmitter PCB
Video transmitter is an open source PCB design by emilyliiuu, published on GitHub. It is a 2-layer board measuring 28 × 28 mm, with 36 components from 27 distinct parts.
Other key parts include the RTC6705 and MLX90393SLW-ABA-011-RE. By type, the board carries 17 capacitors, 10 resistors, 3 connectors, 3 inductors, 2 ICs and 1 crystal.
From the project
uiuc ece445 senior design
Main components on the Video transmitter
Video transmitter bill of materials (BOM)
36 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RTC6705 | QFN40_6x6_RTC | U1 |
| 1 | MLX90393SLW-ABA-011-RE | QFN50P300X300X100-17N | U2 |
| 1 | ASE-8.000MHZ-LC-T | XTAL_ASE-8.000MHZ-LC-T | Y1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P1.00mm_Vertical | J1 |
| 1 | Conn_01x03_Pin | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J2 |
| 1 | CONMHF1-SMD-T | CONN_CONMHF1-SMD_LNX | J3 |
| 2 | 1.2nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1, L3 |
| 1 | 1nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2 |
| 1 | 4.7u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 2 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 1 | 3.3pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 4 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C8, C16, C17 |
| 1 | 33pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 2 | 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C18 |
| 1 | 1nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 3 | 10pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11, C12 |
| 1 | 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14 |
| 1 | 470nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15 |
| 1 | 75 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 2 | 1.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 510k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 270 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 560k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 51 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 10 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
Video transmitter design files
The KiCad project lives in the emilyliiuu/birdsimulator repository on GitHub; these links point at the commit this page was built from.
Video transmitter: common questions
How big is the Video transmitter PCB?
The Video transmitter measures 28 × 28 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Video transmitter?
36 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Video transmitter design files?
From the emilyliiuu/birdsimulator repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Video transmitter design in my own project?
The repository has no license, so all rights stay with emilyliiuu. Use it as a reference, and ask the author before reusing the design.
