Vaucasy right
About the Vaucasy right PCB
Vaucasy right is an open source STM32 PCB design by engemkeres, published on GitHub under the MIT license. It is a 2-layer board measuring 154 × 129.9 mm, with 105 components from 25 distinct parts.
Its main chip is the C116978, from the STM32 family. Other key parts include the C2827654, C5446 and C22459514. By type, the board carries 34 switches, 32 diodes, 17 capacitors, 11 resistors, 5 connectors and 4 ICs.
It belongs with the keyboards designs in this gallery.
From the project
Split ergonomic mechanical keyboard PCB
The MCU chosen for this project was an STM32F401RET6, because I was familiar with STM32s F4 series.
Own firmware with the support of ST's HAL library: in progress
Main components on the Vaucasy right
Vaucasy right bill of materials (BOM)
105 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C116978 STM32F401RET6 | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | C2827654 USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | C5446 XC6206 | SOT-23-3 | U3 |
| 1 | C22459514 TRRS | TRRS_PJ-320A | U4 |
| 1 | C7275083 8MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | C165948 USB_C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | C5248081 OLED_128x32 | OLED_128x32 | J2 |
| 1 | Trackball | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | HC-05 BT | PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | DEBUG | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | C210357 500mA | Fuse_0603_1608Metric | F1 |
| 31 | Keyswitch | Hotswap_Choc_V1V2_1.00u | S1, S2, S3, S4, S5, S6, S7, S8 +23 |
| 1 | C221841 SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | C115351 SW_Push | Button_TL3342 | SW2 |
| 1 | C470788 RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW3 |
| 32 | C7420318 Diode | Diode_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +24 |
| 11 | C1525 100n | C_0402_1005Metric | C1, C2, C3, C4, C5, C7, C13, C14 +3 |
| 1 | C19702 10u | C_0603_1608Metric | C6 |
| 2 | C52923 1u | C_0402_1005Metric | C8, C9 |
| 2 | C1578 8p | C_0402_1005Metric | C10, C11 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C19666 4.7uF | C_0603_1608Metric | C12 |
| 4 | C25744 10k | R_0402_1005Metric | R1, R6, R7, R8 |
| 1 | C25076 100R | R_0402_1005Metric | R2 |
| 2 | C25905 5.1k | R_0402_1005Metric | R3, R4 |
| 4 | C25900 4.7k | R_0402_1005Metric | R9, R10, R13, R14 |
Vaucasy right design files
The KiCad project lives in the engemkeres/vaucasy repository on GitHub; these links point at the commit this page was built from.
Vaucasy right: common questions
What microcontroller does the Vaucasy right use?
The Vaucasy right is built around the C116978, from the STM32 family.
How big is the Vaucasy right PCB?
The Vaucasy right measures 154 × 129.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vaucasy right?
105 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Vaucasy right design files?
From the engemkeres/vaucasy repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Vaucasy right design in my own project?
Yes, under the terms of its MIT license, which engemkeres chose for the repository.
Can I test firmware for the Vaucasy right without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in vaucasy
Similar boards
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32Module 16S
stuartpittaway
71.1 × 89.6 mm113 parts4LCC-BY-NC-4.01.1k
STM32Djinn
tzarc
192.3 × 150.5 mm216 parts2LCERN-OHL-S-2.0988
STM32Ghoul
228.6 × 79.4 mm163 parts2LCERN-OHL-S-2.0988