14 open source boards using the C2827654
Real designs built with the C2827654, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
GBSCSI2 2.5N 235x
GeorgeRudolf
69.5 × 93.6 mm141 parts4LCERN-OHL-S-2.015RP2040/RP2350
MiniRazz
purdeaandrei
142.2 × 48 mm55 parts4LCERN-OHL-P-2.014STM32
Dalws
anhldptit2610
64 × 43 mm72 parts4LMIT2STM32
Vaucasy left
engemkeres
154 × 129.9 mm105 parts2LMIT1RP2040/RP2350
KP08Hub
siderakb
82.6 × 66 mm87 parts2LMIT0ESP32
Esp-Sumo
Dunbarin-O
175.2 × 64.7 mm84 parts4LNo license0STM32
Openseasame
Tejaji-0
45 × 58.2 mm62 parts2LCERN-OHL-S-2.00RP2040/RP2350
GBSCSI2 DB25 2354A
GeorgeRudolf
53 × 31 mm118 parts4LCERN-OHL-S-2.015LiBo BaseBoard
ItsNotDaan
92.4 × 96.6 mm54 parts2LCERN-OHL-P-2.08STM32
Vaucasy right
engemkeres
154 × 129.9 mm105 parts2LMIT1Nordic nRF
KP06 keypad
siderakb
78.6 × 34.8 mm76 parts2LMIT0RP2040/RP2350
GBSCSI2 2.5SCA TH 235x
GeorgeRudolf
69.5 × 93.6 mm106 parts4LCERN-OHL-S-2.015AVR/Arduino
M.2 Arduino Module Board
ItsNotDaan
53.6 × 68.8 mm19 parts2LCERN-OHL-P-2.08STM32
OpenTama
rompasaurus
45 × 58.2 mm62 parts2LNo license2
How designs wire the C2827654
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the C2827654 connects to, and the resistors, capacitors and other passives placed on it.
- The VBUS pin has a decoupling capacitor on 4 of 9 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 75% · a signal 25% | — |
| VBUSpin 5 | Connected to: VBUS 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GBSCSI2 2.5N 235x by GeorgeRudolf, MiniRazz by purdeaandrei, LiBo BaseBoard by ItsNotDaan and Dalws by anhldptit2610.
The C2827654 in open source designs
The gallery holds 14 open source boards using the C2827654 from 9 GitHub repositories; a typical one measures about 74 × 65.4 mm and carries around 80 components.
57% are two-layer designs, the rest use four layers or more, and 86% carry an open source license.
The most starred is GBSCSI2 2.5N 235x by GeorgeRudolf.
Microcontrollers on boards using the C2827654
What boards using the C2827654 are built for
C2827654: common questions
Where can I find a C2827654 reference design?
Each of the 14 boards on this page is a real design using the C2827654. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the C2827654 VBUS pin?
The VBUS pin has a decoupling capacitor on 4 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the C2827654.
What parts are used alongside the C2827654?
The C2040, C462648, C465977, C5446 and C9051 appear in the most repositories here.
Which microcontrollers do boards using the C2827654 use?
Most are built on RP2040/RP2350 (5), STM32 (5), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the C2827654?
The median is 74 × 65.4 mm, and 57% are two-layer designs.
What is the most popular open source board using the C2827654?
By GitHub stars, GBSCSI2 2.5N 235x by GeorgeRudolf, with 15 stars.
Can I simulate one of these boards using the C2827654 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.