Cat-Turret
EngineerGuySam·Cat-Turret·Schematics/Sr Design/Sr Design.kicad_pcb
About the Cat-Turret PCB
Cat-Turret is an open source PCB design by EngineerGuySam, published on GitHub. It is a 2-layer board measuring 87 × 63.5 mm, with 42 components from 26 distinct parts.
Other key parts include the LM555CN. By type, the board carries 15 connectors, 8 resistors, 4 diodes, 2 transistors, 2 capacitors and 1 IC.
It belongs with the robotics & motion designs in this gallery.
From the project
A Raspberry Pi 4–powered pan-and-tilt water gun that uses a camera and YOLO machine learning to detect cats on counters. Built with Python, the system tracks movement, aims with servos, and sprays water to deter unwanted feline adventures.
Main components on the Cat-Turret
Cat-Turret bill of materials (BOM)
42 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM555CN | DIP762W46P254L960H508Q8 | U6 |
| 2 | C6144 | TO-126-3_Vertical | Q1, Q2 |
| 1 | GPIO 16 | PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | GPIO 20 | PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | Tilt Interface | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Buck 12V+ | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Buck GND | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | 555 GPIO | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | WaterGun GPIO | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Water Pump Interface | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | Solenoid Interface | PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | Water Float Switch | PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | Pan Interface | PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | Pi Buck 5V | PinHeader_1x01_P2.54mm_Vertical | J19 |
| 1 | Servo Buck 7V | PinHeader_1x01_P2.54mm_Vertical | J23 |
| 1 | USB-A1HSW6 | OST_USB-A1HSW6 | J25 |
| 1 | Barrel_Jack | BarrelJack_CUI_PJ-063AH_Horizontal | J26 |
| 10 | TestPoint | TestPoint_Loop_D2.50mm_Drill1.0mm | TP_+5V1, TP_+7V1, TP_+12V1, TP_GND1, TP_GPIO_16, TP_GPIO_20, TP_GPIO_22, TP_GPIO_23 +2 |
| 2 | 1N5818 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D3 |
| 1 | LED_R | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED_G | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 2 | 1u F | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 300 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 4 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R9 |
| 1 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 1200 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
Cat-Turret design files
The KiCad project lives in the EngineerGuySam/Cat-Turret repository on GitHub; these links point at the commit this page was built from.
Cat-Turret: common questions
How big is the Cat-Turret PCB?
The Cat-Turret measures 87 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cat-Turret?
42 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cat-Turret design files?
From the EngineerGuySam/Cat-Turret repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cat-Turret design in my own project?
The repository has no license, so all rights stay with EngineerGuySam. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979