DHU-STC51
ErBWs·DHU-STC51·2. Heater/3. PCB/stc89c52.kicad_pcb
About the DHU-STC51 PCB
DHU-STC51 is an open source PCB design by ErBWs, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 85 × 100 mm, with 39 components from 25 distinct parts.
Other key parts include the STC89C52rc, ADC0832, DS18B20 and CH343P. By type, the board carries 10 resistors, 9 capacitors, 5 switches, 4 ICs, 3 diodes and 2 connectors.
From the project
东华大学 STC51 代码及仿真
Main components on the DHU-STC51
DHU-STC51 bill of materials (BOM)
39 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STC89C52rc | DIP-40_W15.24mm | IC1 |
| 1 | ADC0832 | DIP-8_W7.62mm | U1 |
| 1 | DS18B20 | TO-92_Inline | U2 |
| 1 | CH343P | QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm | U3 |
| 1 | S8050 | SOT-23 | Q1 |
| 1 | 11.0592MHZ 11.0592MHz | Crystal_SMD_3215_FC-135_2P | Y1 |
| 1 | USB-Type-C | USB-Type-C_SMD_16P | J1 |
| 1 | Conn_01x02 | VCC_CONN | J2 |
| 1 | WC1602A | WC1602A | DS1 |
| 1 | relay | Relay_StandexMeder_DIP_LowProfile | K1 |
| 1 | 5k | 3296W | RV1 |
| 1 | 3X4 3x4 | BUTTON_3x4 | SW1 |
| 1 | up | BUTTON_3x4 | SW2 |
| 1 | down | BUTTON_3x4 | SW3 |
| 1 | switch | BUTTON_3x4 | SW4 |
| 1 | ctrl | BUTTON_3x4 | SW5 |
| 1 | NTC | PinHeader_1x02_P2.54mm_Vertical | TH1 |
| 2 | RED | LED_0805_2012Metric | D1, D3 |
| 1 | GREEN | LED_0805_2012Metric | D2 |
| 7 | 100NF 100nF | C_0603_1608Metric | C1, C2, C3, C6, C7, C8, C9 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 33PF 33pF | C_0603_1608Metric | C4, C5 |
| 4 | 4.7K | R_0603_1608Metric | R1, R2, R5, R6 |
| 4 | 10K | R_0603_1608Metric | R3, R7, R8, R9 |
| 1 | Heater | PinHeader_1x02_P2.54mm_Vertical | R4 |
| 1 | R_NETWORK04 R_Network04 | R_Array_SIP5 | RN1 |
DHU-STC51 design files
The KiCad project lives in the ErBWs/DHU-STC51 repository on GitHub; these links point at the commit this page was built from.
DHU-STC51: common questions
How big is the DHU-STC51 PCB?
The DHU-STC51 measures 85 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DHU-STC51?
39 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DHU-STC51 design files?
From the ErBWs/DHU-STC51 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DHU-STC51 design in my own project?
Yes, under the terms of its GPL-3.0 license, which ErBWs chose for the repository.