LogicPad

erhancm·LogicPad·02 Electronics/V0.2/3x3_board.kicad_pcb

LogicPad PCB layout, top view — open source STM32 board by erhancm

About the LogicPad PCB

LogicPad is an open source STM32 PCB design by erhancm, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 69.1 × 104.8 mm, with 113 components from 22 distinct parts.

Its main chip is the STM32F103C8TX, from the STM32 family. Other key parts include the TLV62568DBV. By type, the board carries 61 resistors, 13 transistors, 11 capacitors, 10 switches, 10 diodes and 3 connectors.

It belongs with the keyboards designs in this gallery.

From the project

LogicPad shows up as a standard USB keyboard when you plug it in, so it works without any software. The Windows, macOS, and Linux configurator app (built with Tauri 2) gives you a full-screen key editor, YAML profile packs, automatic profile switching based on which app you're us

LogicPad shows up as a standard USB keyboard when you plug it in, so it works without any software. The Windows, macOS, and Linux configurator app (built with Tauri 2) gives you a full-screen key editor, YAML profile packs, automatic profile switching based on which app you're using, and firmware updates over USB.

The app has a built-in simulated LogicPad so you can try everything without owning the physical board. Note that the software is still a work in progress — some features aren't implemented yet.

LogicPad, from the project README
From the project README

Main components on the LogicPad

LogicPad bill of materials (BOM)

113 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F103C8TX
STM32F103C8Tx
U1
1
TLV62568DBV
U2
3
2N7002
Q1, Q2, Q3
10
BSS84
Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11 +2
1
8MHZ
8Mhz
Y1
2
CONN_01X04
Conn_01x04
J1, J3
1
USB_B
J2
1
Fuse
F1
10
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +2
10
RGB_LED
D1, D2, D3, D4, D5, D6, D7, D8 +2
1
1UH
1uH
L1
2
12PF
12pF
C1, C2
7
100N
100n
C3, C4, C5, C6, C7, C8, C9
1
4.7UF
4.7uF
C10
1
22UF
22uF
C11
13
100
R1, R3, R5, R26, R31, R36, R41, R46 +5
13
47K
47k
R2, R4, R6, R25, R30, R35, R40, R45 +5
1
453K
R7
1
100K
R8
2
22
R20, R21
Show 2 more
QtyPartRefs
1
10K
R22
30
165
R27, R28, R29, R32, R33, R34, R37, R38 +22

LogicPad design files

The KiCad project lives in the erhancm/LogicPad repository on GitHub; these links point at the commit this page was built from.

LogicPad: common questions

What microcontroller does the LogicPad use?

The LogicPad is built around the STM32F103C8TX, from the STM32 family.

How big is the LogicPad PCB?

The LogicPad measures 69.1 × 104.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LogicPad?

113 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LogicPad design files?

From the erhancm/LogicPad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the LogicPad design in my own project?

Yes, under the terms of its Apache-2.0 license, which erhancm chose for the repository.

Can I test firmware for the LogicPad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards