HardLabs

Scheda Test Arduino

ErPeris·PC·Scheda_Test_Arduino/Scheda_Test_Arduino.kicad_pcb

Scheda Test Arduino PCB layout, top view — open source AVR/Arduino board by ErPeris

About the Scheda Test Arduino PCB

Scheda Test Arduino is an open source AVR/Arduino PCB design by ErPeris, published on GitHub. It is a 2-layer board measuring 80 × 58 mm, with 14 components from 13 distinct parts.

Its main chip is the Arduino Nano, from the AVR/Arduino family. By type, the board carries 3 connectors, 3 resistors, 2 diodes, 2 capacitors, 1 IC and 1 transistor.

From the project

Scheda con un Arduino Nano come controllo, collegato a: - un modulo BME280 (temperatura, umidità, pressione); - un buzzer; - un servomotore.

Scheda con un Arduino Nano come controllo, collegato a: - un modulo BME280 (temperatura, umidità, pressione); - un buzzer; - un servomotore.

Un interruttore accende tutta la scheda e un LED si accende quando l'interruttore è su ON. Tutti i componenti sono a foro passante.

Come per il driver servo, i file sono in formato KiCad 7 e si aprono in KiCad 9.

- Alimentazione: la batteria (7–12 V, per esempio la stessa LiPo 2S da 7.4 V) entra dal connettore JST J1. Passa dall'interruttore SW1 e arriva al pin VIN dell'Arduino. Il regolatore dell'Arduino genera i 5 V per servo e buzzer e i 3.3 V per…

Main components on the Scheda Test Arduino

Arduino Nano

Scheda Test Arduino bill of materials (BOM)

14 components, 13 distinct parts.

QtyPartRefs
1
Arduino Nano
U1
1
BC547
Q1
1
BATT 7-12V (JST-PH)
J1
1
BME280
J2
1
SERVO
J3
1
Buzzer 5V
BZ1
1
ON/OFF
SW1
1
LED 5mm
D1
1
1N4148
D2
1
100uF 16V
C1
1
220uF 10V
C2
2
1k
R1, R2
1
10k
R3

Scheda Test Arduino design files

The KiCad project lives in the ErPeris/PC repository on GitHub; these links point at the commit this page was built from.

Scheda Test Arduino: common questions

What microcontroller does the Scheda Test Arduino use?

The Scheda Test Arduino is built around the Arduino Nano, from the AVR/Arduino family.

How big is the Scheda Test Arduino PCB?

The Scheda Test Arduino measures 80 × 58 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Scheda Test Arduino?

14 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Scheda Test Arduino design files?

From the ErPeris/PC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Scheda Test Arduino design in my own project?

The repository has no license, so all rights stay with ErPeris. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Scheda Test Arduino without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in PC

Similar boards