44 open source boards using the Arduino_Nano

Real designs built with the Arduino_Nano, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

44 boardsClear filters|Most starred

How designs wire the Arduino_Nano

Read from the KiCad layouts of 37 open source designs, one per repository: what each pin of the Arduino_Nano connects to, and the resistors, capacitors and other passives placed on it.

  • The AREF pin is left unconnected on 34 of 36 designs.
  • The RESET pins is left unconnected on 92% of them (a signal on 6).
  • The D0/RX pin is left unconnected on 25 of 36 designs (a signal on 11).
  • The D1/TX pin is left unconnected on 22 of 36 designs (a signal on 14).
D1/TXpin 1Connected to: Not connected 61% · a signal 39%
D0/RXpin 2Connected to: Not connected 69% · a signal 31%
RESETpin 3, 28Connected to: Not connected 92%
GNDpin 4, 29Connected to: GND 81%
AREFpin 18Connected to: Not connected 94%
VINpin 30Connected to: Not connected 61% · VIN 19% · a signal 19%

22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8bit computer by vascofazza, Arduino Spot Welder V3 by KaeptnBalu, Mainboard by ukmars and MPCNC-Nano-Estlcam-Shield by tnn85.

The Arduino_Nano in open source designs

The gallery holds 44 open source boards using the Arduino_Nano from 42 GitHub repositories; a typical one measures about 99.4 × 89 mm and carries around 33 components.

98% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is 8bit computer by vascofazza.

Microcontrollers on boards using the Arduino_Nano

Arduino_Nano: common questions

Where can I find a Arduino_Nano reference design?

Each of the 44 boards on this page is a real design using the Arduino_Nano. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the Arduino_Nano AREF pin connected?

The AREF pin is left unconnected on 34 of 36 designs. Counted from the KiCad layouts of 37 open source designs using the Arduino_Nano.

How is the Arduino_Nano RESET pin connected?

The RESET pins is left unconnected on 92% of them (a signal on 6). Counted from the KiCad layouts of 37 open source designs using the Arduino_Nano.

How is the Arduino_Nano D0/RX pin connected?

The D0/RX pin is left unconnected on 25 of 36 designs (a signal on 11). Counted from the KiCad layouts of 37 open source designs using the Arduino_Nano.

What parts are used alongside the Arduino_Nano?

The 74HCT04, 74HCT08, NE555, 28C64 and 74HC595 appear in the most repositories here.

Which microcontrollers do boards using the Arduino_Nano use?

Most are built on AVR/Arduino (43) and STM32 (1).

How big is a typical board using the Arduino_Nano?

The median is 99.4 × 89 mm, and 98% are two-layer designs.

What is the most popular open source board using the Arduino_Nano?

By GitHub stars, 8bit computer by vascofazza, with 314 stars.

Can I simulate one of these boards using the Arduino_Nano before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part