Chewing gum
About the Chewing gum PCB
Chewing gum is an open source PCB design by esl-epfl, published on GitHub. It is a 2-layer board measuring 13.1 × 49.3 mm, with 23 components from 21 distinct parts.
Other key parts include the INA212AIDCKR and FT4232HL. By type, the board carries 10 connectors, 6 resistors, 3 capacitors, 2 ICs and 1 diode.
It belongs with the usb & debug tools designs in this gallery.
From the project
This is a set of PCBs to test, in principle, X-HEEP chips (CHEEPs)... but, you can use it to test any chip you want, for what it matters.
This is a set of PCBs to test, in principle, X-HEEP chips (CHEEPs)... but, you can use it to test any chip you want, for what it matters.
The general idea is to recycle efforts, so all the things that are common to any CHEEP were moved into a main board. This one includes an FTDI through which you can program or communicate with your cheep, as well as some peripherals like flash, buttons, LEDs, etc. The main board also generates all the voltages needed by these blocks.
Main components on the Chewing gum
Chewing gum bill of materials (BOM)
23 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA212AIDCKR | SOT-363_SC-70-6 | IC1 |
| 1 | FT4232HL TLV75801PDBV | SOT-23-5 | U1 |
| 1 | Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_Coaxial | SMA_Amphenol_901-144_Vertical | J2 |
| 1 | CONN_01X04 Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J3 |
| 3 | Conn_02x01 | PinHeader_1x02_P2.54mm_Vertical | J4, J5, J11 |
| 1 | C2987686 Conn_01x06 | PinHeader_1x06_P1.27mm_Vertical | J7 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P Conn_01x06 | PinHeader_1x06_P1.27mm_Vertical | J8 |
| 1 | CONN_02X04_ODD_EVEN Conn_01x04 | PinHeader_1x04_P1.27mm_Vertical | J9 |
| 1 | Conn_01x04 | PinHeader_1x04_P1.27mm_Vertical | J10 |
| 1 | 500K | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | 100NF 10u | C_0603_1608Metric | C1 |
| 1 | 100NF 0.1u | C_0603_1608Metric | C2 |
| 1 | 30PF 22u | C_0603_1608Metric | C3 |
| 1 | 10K 1k | R_0603_1608Metric | R1 |
| 1 | C22790 10k | R_0603_1608Metric | R2 |
| 1 | 10K 46k4 | R_0603_1608Metric | R3 |
| 1 | 48.7k | R_0603_1608Metric | R4 |
| 1 | 36k | R_0603_1608Metric | R5 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 23.7K 0.02 | R_2512_6332Metric | R6 |
Chewing gum design files
The KiCad project lives in the esl-epfl/HEEPidermis repository on GitHub; these links point at the commit this page was built from.
Chewing gum: common questions
How big is the Chewing gum PCB?
The Chewing gum measures 13.1 × 49.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Chewing gum?
23 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Chewing gum design files?
From the esl-epfl/HEEPidermis repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Chewing gum design in my own project?
The repository has no license, so all rights stay with esl-epfl. Use it as a reference, and ask the author before reusing the design.
More boards in HEEPidermis
Similar boards
FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0490
Flipper blackhat
o7-machinehum
91 × 53.1 mm167 parts4LCC-BY-NC-4.0292
Relatively-Universal-ROM-Programmer
AndersBNielsen
68.8 × 53.6 mm141 parts2LGPL-3.0253
Ovc5
osrf
98 × 97 mm197 parts6LApache-2.0208
Easy pdk programmer hardware
free-pdk
26.7 × 21.6 mm28 parts2LCC-BY-SA-4.0206
65uino
74.4 × 53.6 mm80 parts2LCustom license165