RF-Oscillator

Eugen98·RF-Oscillator·gen_hf/gen_hf.kicad_pcb

RF-Oscillator PCB layout, top view — open source board by Eugen98

About the RF-Oscillator PCB

RF-Oscillator is an open source PCB design by Eugen98, published on GitHub. It is a 2-layer board measuring 61.5 × 41.5 mm, with 11 components from 11 distinct parts.

By type, the board carries 4 capacitors, 3 resistors, 1 transistor, 1 antenna and 1 inductor.

It belongs with the rf & radio designs in this gallery.

From the project

An educational project of a compact RF oscillator based on a single S9018 NPN transistor. The PCB was designed in KiCad 10 and is intended for 9 V power supply, a trimmer capacitor, and an external wire antenna.

An educational project of a compact RF oscillator based on a single S9018 NPN transistor. The PCB was designed in KiCad 10 and is intended for 9 V power supply, a trimmer capacitor, and an external wire antenna.

- 9 V power supply - S9018 transistor in TO-92 package - RF resonant circuit using L1 and C4 - Frequency adjustment with trimmer capacitor C4 - 120 nH 0805 SMD inductor - External antenna connector - Manually routed PCB - GND copper pour on the bottom (B.Cu) layer - Closed board outline on the Edge.Cuts layer

RF-Oscillator bill of materials (BOM)

11 components, 11 distinct parts.

QtyPartRefs
1
S9018
Q1
1
+9V
+9V1
1
GND
ANT1
1
120nH
L1
1
8pF
C1
1
10nF
C2
1
100nF
C3
1
5...20pF
C4
1
220R
R1
1
15k
R2
1
3k9
R3

RF-Oscillator design files

The KiCad project lives in the Eugen98/RF-Oscillator repository on GitHub; these links point at the commit this page was built from.

RF-Oscillator: common questions

How big is the RF-Oscillator PCB?

The RF-Oscillator measures 61.5 × 41.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RF-Oscillator?

11 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the RF-Oscillator design files?

From the Eugen98/RF-Oscillator repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RF-Oscillator design in my own project?

The repository has no license, so all rights stay with Eugen98. Use it as a reference, and ask the author before reusing the design.

Similar boards