PicLPC Demo
About the PicLPC Demo PCB
PicLPC Demo is an open source PIC PCB design by eyalo-dev, published on GitHub. It is a 2-layer board measuring 71.1 × 98.4 mm, with 24 components from 12 distinct parts.
Its main chip is the PIC16F685-IP, from the PIC family. By type, the board carries 7 resistors, 5 jumpers, 4 diodes, 3 connectors, 2 capacitors and 1 IC.
From the project
my public CAD/PCB files
Description: - Demo board to PIC low (<=20) pin count CPUs
This is functional similar but not exact copy. All dimension were estimated by eye. Tried to use similar component placment as much as posible, but using only Kicad standard PCB component footprint library, so dimentions may very.
Main components on the PicLPC Demo
PicLPC Demo bill of materials (BOM)
24 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC16F685-IP | DIP-20_W7.62mm_Socket_LongPads | U1 |
| 1 | Conn_01x14_Female | PinHeader_1x14_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06_Male | PinHeader_1x06_P2.54mm_Vertical | P1 |
| 1 | PWR | PinHeader_1x02_P2.54mm_Vertical | P2 |
| 5 | Jumper_NO_Small | PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3, JP4, JP5 |
| 1 | 10K | Potentiometer_Piher_PT-10-V10_Vertical | RV1 |
| 1 | SW_SPST | SW_PUSH_6mm | SW1 |
| 4 | LED | LED_D5.0mm_Clear | D1, D2, D3, D4 |
| 2 | 0.1uF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 2 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R7 |
| 4 | 470R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R6 |
PicLPC Demo design files
The KiCad project lives in the eyalo-dev/cad-public repository on GitHub; these links point at the commit this page was built from.
PicLPC Demo: common questions
What microcontroller does the PicLPC Demo use?
The PicLPC Demo is built around the PIC16F685-IP, from the PIC family.
How big is the PicLPC Demo PCB?
The PicLPC Demo measures 71.1 × 98.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PicLPC Demo?
24 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the PicLPC Demo design files?
From the eyalo-dev/cad-public repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PicLPC Demo design in my own project?
The repository has no license, so all rights stay with eyalo-dev. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PicLPC Demo without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in cad-public
EE-83-PulseGen
146.1 × 75.6 mm50 parts2LNo license0
EE-83-function
95.3 × 95.3 mm48 parts2LNo license0
ETI-438
102.9 × 79.4 mm44 parts2LNo license0
SoundGen
58.4 × 111.1 mm39 parts2LNo license0
Tennis
260.4 × 82.6 mm34 parts2LNo license0
VariablePowerSupplay
78.1 × 87.9 mm32 parts2LNo license0
Elk pwm amp
45.1 × 95.3 mm28 parts2LNo license0
PICSmoothOperator
79.4 × 45.7 mm28 parts2LNo license0
ServoTester
113 × 67.9 mm27 parts2LNo license0
TrainControl
95.3 × 57.8 mm23 parts2LNo license0
Similar boards
PICPslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7k
PICMicro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414
PICGB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0376
PICGB-MBCTEST
51.4 × 61 mm32 parts2LCC-BY-4.0376
PICGB-BENCH-G1
100 × 100 mm98 parts4LCC-BY-4.0376
PICGB-LIVE32
51.4 × 61 mm46 parts4LCC-BY-4.0376