HardLabs

SmoothOperator

eyalo-dev·cad-public·SmoothOperator/SmoothOperator.kicad_pcb

SmoothOperator PCB layout, top view — open source PIC board by eyalo-dev

About the SmoothOperator PCB

SmoothOperator is an open source PIC PCB design by eyalo-dev, published on GitHub. It is a 2-layer board measuring 79.4 × 45.7 mm, with 28 components from 17 distinct parts.

Its main chip is the PIC16F84A, from the PIC family. Other key parts include the L7805. By type, the board carries 6 connectors, 6 resistors, 5 capacitors, 3 diodes, 2 ICs and 2 switches.

From the project

my public CAD/PCB files

Description: - Small board to control hoby type servo, as relacement for switch in model tarine sets.

Source reference: - Elektor 2004-06.pdf, p. 38 (38) - ref. no. 030209-1

This is functional similar but not exact copy. All dimensions were estimated by eye. Tried to use similar component placment as much as posible, but using only Kicad standard PCB component footprint library, so dimentions may very.

Main components on the SmoothOperator

PIC16F84AL7805

SmoothOperator bill of materials (BOM)

28 components, 17 distinct parts.

QtyPartRefs
1
PIC16F84A
U1
1
L7805
U2
1
BC547
Q1
1
Crystal
Y1
1
Conn_01x03_Male
J1
1
Conn_01x03_Male
J2
4
Conn_01x02_Male
J3, J4, J5, J6
1
Conn_01x02_Male
JP1
1
DIPxx-1Cxx-51x
K1
2
SW_SPST
SW1, SW2
1
1N4001
D1
2
1N4148
D2, D3
1
100uF/25V
C1
1
10uF/16V
C2
1
100nF
C3
2
22pF
C4, C5
6
10K
R1, R2, R3, R4, R5, R6

SmoothOperator design files

The KiCad project lives in the eyalo-dev/cad-public repository on GitHub; these links point at the commit this page was built from.

SmoothOperator: common questions

What microcontroller does the SmoothOperator use?

The SmoothOperator is built around the PIC16F84A, from the PIC family.

How big is the SmoothOperator PCB?

The SmoothOperator measures 79.4 × 45.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SmoothOperator?

28 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the SmoothOperator design files?

From the eyalo-dev/cad-public repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the SmoothOperator design in my own project?

The repository has no license, so all rights stay with eyalo-dev. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SmoothOperator without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in cad-public

Similar boards