Came IWQ
About the Came IWQ PCB
Came IWQ is an open source AVR/Arduino PCB design by f1iwq2, published on GitHub. It is a 2-layer board measuring 175 × 95 mm, with 103 components from 47 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the L7805, ACPL-844, MOC3020M and 7824. By type, the board carries 41 resistors, 18 capacitors, 13 diodes, 11 connectors, 4 ICs and 4 transistors.
From the project
Carte de remplacement pour portail CAME ZBX6N/7N - A base d'arduino nano
Main components on the Came IWQ
Came IWQ bill of materials (BOM)
103 components, 47 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | TO-220-3_Vertical | U1 |
| 1 | ACPL-844 | DIP-16_W7.62mm_LongPads | U2 |
| 1 | MOC3020M | DIP-6_W7.62mm_LongPads | U3 |
| 1 | 7824 | TO-220-3_Vertical | U4 |
| 1 | Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 3 | BS170 | TO-92L_Inline_Wide | Q2, Q3, Q4 |
| 1 | BTA26-600-BWRG | TO-3P-3_Vertical | Q5 |
| 1 | Conn_01x02_Male | PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_Vertical | J1 |
| 1 | Conn_01x04_Male | PhoenixContact_MSTBVA_2,5_4-G-5,08_1x04_P5.08mm_Vertical | J2 |
| 1 | Conn_01x07_Male | PhoenixContact_MSTBVA_2,5_7-G-5,08_1x07_P5.08mm_Vertical | J3 |
| 1 | Conn_01x09_Male | PhoenixContact_MSTBVA_2,5_9-G-5,08_1x09_P5.08mm_Vertical | J4 |
| 2 | Conn_01x03_Male | PhoenixContact_MSTBVA_2,5_3-G-5,08_1x03_P5.08mm_Vertical | J5, J10 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J6 |
| 3 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J7, J8, J11 |
| 1 | Conn_01x04 | PinHeader_1x01_P2.54mm_Vertical | J9 |
| 4 | SW_MEC_5E | SW_SPST_Omron_B3FS-101xP | Bp+1, Bp-1, Bp-Ent1, BpEch1 |
| 3 | Fuse | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1, F2, F4 |
| 1 | Wurth 7446223001 | Filtre_wurth | FL1 |
| 1 | Finder 40.62.9.024V | Relay_socket_95.15.2 | K2 |
| 2 | Finder 40.61.9.024V | Relay_socket_95.15.2 | K3, K4 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1.5KE400CA | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | D1 |
| 1 | W04G | Diode_Bridge_Round_D8.9mm | D2 |
| 7 | 1N4004 | D_DO-41_SOD81_P10.16mm_Horizontal | D3, D5, D7, D8, D11, D12, D13 |
| 2 | 1.5KE39CA | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | D4, D10 |
| 1 | LED | LED_D3.0mm | D9 |
| 1 | DZ5.1V | D_A-405_P7.62mm_Horizontal | D14 |
| 9 | 100nF | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1, C4, C7, C8, C9, C15, C16, C19 +1 |
| 1 | 1000µF 35V | CP_Radial_D12.5mm_P5.00mm | C2 |
| 2 | 10nF 400V | C_Rect_L9.0mm_W2.5mm_P7.50mm_MKT | C3, C6 |
| 2 | 100nF 400V | C_Rect_L16.5mm_W6.0mm_P15.00mm_MKT | C5, C18 |
| 1 | 1nF | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C10 |
| 3 | 100 nF | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C12, C13, C14 |
| 3 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R36, R41 |
| 2 | 4,7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R27 |
| 8 | 5,6k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R5, R10, R11, R16, R23, R24, R39 |
| 10 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R12, R13, R20, R22, R25, R26, R30 +2 |
| 3 | 12k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R7, R18 |
| 3 | 2,7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R9, R14 |
| 4 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15, R17, R21, R28 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R19 |
| 1 | 47 2W | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R29 |
| 1 | 6,8k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R31 |
| 1 | 150 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R33 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R35 |
| 1 | 0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R37 |
| 1 | 1,2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R38 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R40 |
Came IWQ design files
The KiCad project lives in the f1iwq2/Came_IWQ repository on GitHub; these links point at the commit this page was built from.
- Layoutportail_jc.kicad_pcb
Came IWQ: common questions
What microcontroller does the Came IWQ use?
The Came IWQ is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the Came IWQ PCB?
The Came IWQ measures 175 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Came IWQ?
103 components, from 47 distinct parts. The full bill of materials is listed on this page.
Where can I download the Came IWQ design files?
From the f1iwq2/Came_IWQ repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Came IWQ design in my own project?
The repository has no license, so all rights stay with f1iwq2. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Came IWQ without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k