Gigasound midi
Faggenza·gigasound-midi·gigasound-hw/gigasound-hw.kicad_pcb
About the Gigasound midi PCB
Gigasound midi is an open source STM32 PCB design by Faggenza, published on GitHub. It is a 2-layer board measuring 156.1 × 134.5 mm, with 100 components from 28 distinct parts.
Its main chip is the STM32F401RETx, from the STM32 family. Other key parts include the USBLC6-2SC6 and AMS1117-3.3. By type, the board carries 42 capacitors, 24 resistors, 19 diodes, 5 connectors, 4 switches and 3 ICs.
It belongs with the keyboards, audio and sensors designs in this gallery.
From the project
Polyphonic midi keyboard with STM32
A USB-connected MPE MIDI keyboard using piezoresistive sensors for expressive, pressure-sensitive input, built around the STM32F401 microcontroller.
Main components on the Gigasound midi
Gigasound midi bill of materials (BOM)
100 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F401RETx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U5 |
| 1 | 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x05_Socket_FPC_Joycon | Joycon-FPC-1x05-P0.5mm | J1 |
| 1 | Conn_01x05_Socket_UART | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J4 |
| 1 | PIN_LED_OUT | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04_Socket_OLED | PinSocket_1x04_P2.54mm_Vertical_OLED_0.96inch | J6 |
| 1 | 100K | Potentiometer_Alps_RK09K_Single_Vertical | RV1 |
| 1 | PLAY | SW_SPST_TL3342 | SW1 |
| 1 | Reset | SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | STOP | SW_SPST_TL3342 | SW4 |
| 1 | MODE | SW_SPST_TL3342 | SW5 |
| 8 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 11 | WS2812B | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D10, D11, D12, D13, D14, D15, D16, D17 +3 |
| 1 | 600R | L_0201_0603Metric_Pad0.64x0.40mm_HandSolder | L1 |
| 2 | 7.5pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2 |
| 9 | 100nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C4, C5, C6, C7, C8, C9, C10 +1 |
| 1 | 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C28 |
| 19 | 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C14, C15, C16, C17, C18, C19, C20, C21 +11 |
| 9 | DNF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C34, C35, C36, C37, C38, C39, C40, C41 +1 |
| 8 | R_Variable | FSR402 | R1, R11, R13, R15, R17, R19, R21, R23 |
| 1 | 1K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 11 | 10K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4, R5, R6, R9, R12, R14, R16 +3 |
| 2 | 5.1k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7, R8 |
| 2 | 0 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R24, R25 |
Gigasound midi design files
The KiCad project lives in the Faggenza/gigasound-midi repository on GitHub; these links point at the commit this page was built from.
Gigasound midi: common questions
What microcontroller does the Gigasound midi use?
The Gigasound midi is built around the STM32F401RETx, from the STM32 family.
How big is the Gigasound midi PCB?
The Gigasound midi measures 156.1 × 134.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gigasound midi?
100 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gigasound midi design files?
From the Faggenza/gigasound-midi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Gigasound midi design in my own project?
The repository has no license, so all rights stay with Faggenza. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Gigasound midi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k