10 open source boards using the STM32F401RETx

Real designs built with the STM32F401RETx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the STM32F401RETx

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the STM32F401RETx connects to, and the resistors, capacitors and other passives placed on it.

  • The PH0 pin has a crystal on 9 of 10 designs, most often 8 MHz (then 25 MHz).
  • The VDD pins have a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 4.7 µF).
  • The VCAP1 pin has a capacitor to GND on 9 of 10 designs, most often 2.2 µF (then 4.7 µF).
  • The VREF+ pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 1 µF).
VBATpin 1Connected to: 3.3V 90%
  • Decoupling capacitor on 70% · 100 nF (9), 4.7 µF (1), 10 µF (1)
PC13pin 2Connected to: Not connected 60% · a signal 40%
  • Pull-up to VDD on 30% · 10 kΩ (2), 100 kΩ (1)
PH0pin 5Connected to: Signal 90%
  • Crystal on 90% · 8 MHz (4), 25 MHz (2), 16 MHz (1)
  • Capacitor to GND on 70% · 12 pF (2), 22 pF (2), 20 pF (2)
PH1pin 6Connected to: Signal 80% · not connected 20%
  • Crystal on 60% · 8 MHz (4), 25 MHz (1)
  • Capacitor to GND on 50% · 22 pF (2), 20 pF (2), 12 pF (1)
NRSTpin 7Connected to: A connector 40%
  • Capacitor to GND on 70% · 100 nF (6)
  • Pull-up to 3.3V on 60% · 10 kΩ (3), 4.7 kΩ (2)
VSSApin 12Connected to: GND 100%
VREF+pin 13Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (8), 1 µF (3), 10 µF (1)
PA1pin 15Connected to: A connector 40% · not connected 20%
  • Series resistor on 30% · 100 Ω (2), 10 kΩ (1)
VSSpin 18, 31, 47, 63Connected to: GND 100%
VDDpin 19, 32, 48, 64Connected to: 3.3V 95%
  • Decoupling capacitor on 90% · 100 nF (29), 4.7 µF (6), 10 µF (2)
PC5pin 25Connected to: Not connected 60% · a signal 40%
VCAP1pin 30Connected to: Signal 100%
  • Capacitor to GND on 90% · 2.2 µF (4), 4.7 µF (4), 22 µF (1)
PA11pin 44Connected to: A connector 30% · not connected 20%
  • Series resistor on 30% · 22 kΩ (1), 10 Ω (1), 0 Ω (1)
PA12pin 45Connected to: A connector 30% · not connected 20%
  • Series resistor on 30% · 22 kΩ (1), 10 Ω (1), 0 Ω (1)
PB6pin 58Connected to: A connector 50%
  • Pull-up to 3.3V on 30% · 4.7 kΩ (1), 10 kΩ (1)
PB7pin 59Connected to: A connector 50% · not connected 20%
  • Pull-up to 3.3V on 30% · 4.7 kΩ (1), 10 kΩ (1)
BOOT0pin 60Connected to: A connector 20% · GND 20%
  • Resistor to GND on 60% · 10 kΩ (6)
PB8pin 61Connected to: A connector 30% · not connected 40%
  • Pull-up to 3.3V on 30% · 4.7 kΩ (2), 5.1 kΩ (1)
PB9pin 62Connected to: A connector 30% · not connected 30%
  • Pull-up to 3.3V on 30% · 4.7 kΩ (2), 5.1 kΩ (1)

39 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AudioVisualizer by Gex-devs, STM32 LQFP64 Minimum System by mekatronik-achmadi, LabNode-Nexus by aleko-khomasuridze and Svelotracker by SL-RU.

The STM32F401RETx in open source designs

The gallery holds 10 open source boards using the STM32F401RETx from 10 GitHub repositories; a typical one measures about 100 × 80.8 mm and carries around 77 components.

80% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is AudioVisualizer by Gex-devs.

Parts used alongside the STM32F401RETx

Microcontrollers on boards using the STM32F401RETx

STM32F401RETx: common questions

Where can I find a STM32F401RETx reference design?

Each of the 10 boards on this page is a real design using the STM32F401RETx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the STM32F401RETx PH0 pin connected?

The PH0 pin has a crystal on 9 of 10 designs, most often 8 MHz (then 25 MHz). Counted from the KiCad layouts of 10 open source designs using the STM32F401RETx.

What decoupling capacitors do designs use on the STM32F401RETx VDD pin?

The VDD pins have a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 10 open source designs using the STM32F401RETx.

How is the STM32F401RETx VCAP1 pin connected?

The VCAP1 pin has a capacitor to GND on 9 of 10 designs, most often 2.2 µF (then 4.7 µF). Counted from the KiCad layouts of 10 open source designs using the STM32F401RETx.

Which microcontrollers do boards using the STM32F401RETx use?

Most are built on STM32 (9) and RP2040/RP2350 (1).

How big is a typical board using the STM32F401RETx?

The median is 100 × 80.8 mm, and 80% are two-layer designs.

What is the most popular open source board using the STM32F401RETx?

By GitHub stars, AudioVisualizer by Gex-devs, with 3 stars.

Can I simulate one of these boards using the STM32F401RETx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part